IEC TR 62343-6-8-2011 PDF

IEC TR 62343-6-8-2011 PDF

Dynamic modules-Part 6-8: Categorization study of dynamic performance requirements

$25.22 $50.44 -50%
Product Code: IEC TR 62343-6-8
Stock In Stock
Edition: 1.0
Published: 11/2011
Number of Pages: 14
File Size: 1 file, 222 Bytes

Available Options

Product Description

Dynamic modules – Part 6-8: Categorization study of dynamic performance requirements

Scope: This technical report outlines the categorization of dynamic performance requirements for dynamic modules. There are many kinds of dynamic modules in the marketplace with many different transient performance requirements. First, they are distinguished between the performance requirements for steady state and the transient state behaviour. Next are the requirements for transient characteristics during the transition period. Finally, a three-level categorization for the transient performance requirements is presented. Categorization background The most important feature of dynamic modules is that their optical performance can be changed by sending external commands and/or requests. Before and after receiving the command, the dynamic module should maintain its optical performance in the steady state as shown in Figure 1. This condition is called Level-0. During this steady state, any performance requirements, such as optical performance, reliability, and measurement method, are the same as those of completely passive devices. In contrast, the performance requirements with respect to the transient characteristics have been insufficiently studied and may vary according to the system applications. In this report, the requirements for the transient characteristics during transition period are categorized into three levels of complexity. Figure 1 – A schematic illustration of Level–0 Categorization levels 3.1 Level –1 This level is the least complex. The transient characteristics during the transition period are free from any restriction. For example, in the case of a variable optical attenuator (VOA) with a 1 × 2 optical switch used for the redundancy, some overshoot or undershoot is acceptable. Because the signal is shut down by the optical switch during the time from t0 to t1, as Time Performance Steady state (fixed) IEC 2398/11

Contents:

  • FOREWORD
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TR 62343-6-8-2011 PDF

IEC TR 62343-6-8-2011 PDF

$25.22 $50.44