IEC TR 62362-2020 PDF

IEC TR 62362-2020 PDF

Selection of optical fibre cable specifications relative to mechanical, ingress, climatic or electromagnetic characteristics-Guidance

$72.51 $145.02 -50%
Product Code: IEC TR 62362
Stock In Stock
Edition: 2.0
Published: 09/2020
Number of Pages: 24
File Size: 1 file, 1020 Bytes

Available Options

Product Description

Selection of optical fibre cable specifications relative to mechanical, ingress, climatic or electromagnetic characteristics – Guidance

Introduction: Optical fibre cable specification standards are defined in IEC 60794 (all parts), which are listed in Annex B. They are organized in a hierarchy similar to the IECQ system. They differ from the IECQ system in that they are all performance standards. Optical fibre cable standards specify the attributes and tests on cables intended to verify adequate protection of fibres against external influences during the cabling process, cable installation handling and from environmental effects during storage and operation.. The attributes of the fibres within the cable are defined by reference to optical fibre specification standards of the IEC 60793 series, which are listed in Annex C. A complete and up-to-date listing of standards in the IEC 60793 and IEC 60794 series is available on the IEC website: http://www.iec.ch. The different levels of hierarchy are: generic, sectional, family and product. The primary distinction between these is the level of detail. Typically, more options or wider ranges are present at the higher level. At a given level, the distinctions are with respect to application or cable construction. Clause 2 of this document gives a more complete mapping. Parts of the family specification include blank detail specifications for various attributes that do not have normative requirements. At the sectional specification level, the main categories are indoor cables, outdoor cables, cables along overhead lines, microduct cabling and indoor/outdoor cables. Typically, the ou

Scope: The purpose of this document is to provide information on the specification of optical fibre cables with respect to the mechanical, ingress, climatic and chemical or electromagnetic characteristics (MICE) as classified in ISO/IEC 11801-1. In this classification system, each letter of the four initials of the acronym are subscripted with a value from one to three to indicate different severities. The current attributes and severities are found in Annex A.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TR 62362-2020 PDF

IEC TR 62362-2020 PDF

$72.51 $145.02