Selection of optical fibre cable specifications relative to mechanical, ingress, climatic or electromagnetic characteristics – Guidance
Introduction: Optical fibre cable specification standards are defined in IEC 60794 (all parts), which are listed in Annex B. They are organized in a hierarchy similar to the IECQ system. They differ from the IECQ system in that they are all performance standards. Optical fibre cable standards mainly cover the attributes and tests that protect the fibre from the environment, including installation, and the fibre attributes that may be affected by cabling. Optical fibre cable standards specify the attributes and tests on cables intended to verify adequate protection of fibres against external influences during the cabling process, cable installation handling and from environmental effects during storage and operation. The attributes of the fibres within the cable are defined by reference to optical fibre specification standards of the IEC 60793 series, which are listed in Annex C. A complete and up-to-date listing of standards in the IEC 60793 and IEC 60794 series is available on the IEC website: http://www.iec.ch. The different levels of hierarchy are: general generic, sectional, family and product. The primary distinction between these is the level of detail. Typically, more options or wider ranges are present at the higher level. At a given level, the distinctions are with respect to application or cable construction. The references section Clause 2 of this document gives a more complete mapping. Parts of the family specification include blank detail specifications for various attributes
Scope: The purpose of this document is to provide information on the specification of optical fibre cables with respect to the mechanical, ingress, climatic and chemical or electromagnetic characteristics (MICE) as classified in ISO/IEC 24702 ISO/IEC 11801-1. In this classification system, each letter of the four initials of the acronym are subscripted with a value from one to three to indicate different severities. The current attributes and severities are found in Annex A.
Contents:
- FOREWORD
- INTRODUCTION
- Scope