IEC TR 62433-2-1-2010 PDF

IEC TR 62433-2-1-2010 PDF

EMC IC modelling-Part 2-1: Theory of black box modelling for conducted emission

$132.41 $264.81 -50%
Product Code: IEC TR 62433-2-1
Stock In Stock
Edition: 1.0
Published: 10/2010
Number of Pages: 64
File Size: 1 file, 774 Bytes

Available Options

Product Description

EMC IC modelling – Part 2-1: Theory of black box modelling for conducted emission

Scope: This part of IEC 62433-2-1 covers black box modelling which has the potential to make the modelling of conducted emission very simple, very fast, and can provide complete protection of proprietary information of IC vendors. This technical report is intended to provide the theoretical background on black box modelling for IC conducted emission. Integrated circuit and modelling board Figure 1 shows an integrated circuit (IC) and a modelling board. The IC is equipped with power/ ground pins, output pins and input pins. Usually an IC requires different power supply connections, namely, to supply digital cores, I/Os, and analogue circuits. Each one of these power supplies may have plural pins. An IC cannot be activated by itself. To activate the IC properly, the IC has to be provided with power supplies, a set of input signals or an input signal vector, and appropriate loads for output pins. To achieve these requirements, the modelling board is used. The modelling board provides minimum requirements for the activation. It supplies power, and input signals to the IC, and it gives typical loads for the output pins. In addition, power/ ground pins of the same category are connected to each other in the modelling board resulting in one terminal for each category of the power/ ground supply at the interface of the modelling board. The board is also used for parameter extractions for modelling the IC. The IC modelling includes the board. The relationship between the IC modelling and the modelling board is just like the relationship between measured data and measurement board that affects measurement data. Therefore the modelling board should be as simple and general as possible. – 30 – TR 62433-2-1 © CEI:2010 AVANT-PROPOS..................................................................................................................32 Domaine d’application ....................................................................................................34 Circuit intégré et carte de modélisation...........................................................................34 Hypothèses .........................................................................................

Contents:

  • FOREWORD
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TR 62433-2-1-2010 PDF

IEC TR 62433-2-1-2010 PDF

$132.41 $264.81