IEC TR 62572-4 (REDLINE + STANDARD)-2020 PDF

IEC TR 62572-4 (REDLINE + STANDARD)-2020 PDF

Fibre optic active components and devices-Reliability standards-Part 4: Guidelines for optical connector end-face cleaning methods for receptacle style optical transceivers

$171.50 $342.99 -50%
Product Code: IEC TR 62572-4 (REDLINE + STANDARD)
Stock In Stock
Edition: 2.0
Published: 09/2020
Number of Pages: 56
File Size: 1 file, 3.1 MB

Available Options

Product Description

Fibre optic active components and devices – Reliability standards – Part 4: Guidelines for optical connector end-face cleaning methods for receptacle style optical transceivers

Introduction: High speed internet communication systems and subscriber systems have spread rapidly owing to the increased capacity of data communication. In these systems, receptacle style optical transceivers such as SFP (small form factor pluggable) and XFP (10-Gbps 10-Gbit/s small form factor pluggable), which can be mounted and removed during transmission systems operation, are widely used. Optical receptacles of optical transceivers are connected to optical connector plugs of optical patch cords, and optical signals are transmitted and received through these optical receptacles. Pluggable type optical transceivers are required to be low cost and typically of small size and low cost, and their designs are often simplified. Therefore, the internal structure, especially the receptacle structure, tends to vary between optical transceiver manufacturers. Generally, to maintain high reliability, of optical connections require cleaning of, the optical connector end-face needs to be cleaned. The Technical Report on cleaning of optical connector plugs and optical adaptors, IEC TR 62627-01 [1]1, proposed by Japan, was published in August 2010 and revised in January 2016. There are, however, no standard cleaning methods for the optical receptacles of optical transceivers. It is a concern that the failure of optical transceivers due to damage and contamination of the optical receptacle end-face may can lead to failure in optical network systems. Multifibre connectors, like the multi-fibre push-on

Scope: This part of IEC 62572, which is a Technical Report, provides guidelines for optical connector end-face cleaning methods for receptacle style optical transceivers. It includes details about handling receptacle style optical transceivers, internal structures of optical transceivers, information on cleaning tools and machines, applicable cleaning methods, and cleaning procedures. Receptacle style optical transceivers as well as optical fibre patch cords are handled by operators and maintenance staff of optical network systems. This document may can be used as a guideline to prepare instruction manuals for the operators and maintenance staff of optical network systems.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TR 62572-4 (REDLINE + STANDARD)-2020 PDF

IEC TR 62572-4 (REDLINE + STANDARD)-2020 PDF

$171.50 $342.99