IEC TR 62627-04-2012 PDF

IEC TR 62627-04-2012 PDF

Fibre optic interconnecting devices and passive components-Part 04: Example of uncertainty calculation: Measurement of the attenuation of an optical connector

$100.88 $201.76 -50%
Product Code: IEC TR 62627-04
Stock In Stock
Edition: 1.0
Published: 07/2012
Number of Pages: 26
File Size: 1 file, 295 Bytes

Available Options

Product Description

Fibre optic interconnecting devices and passive components – Part 04: Example of uncertainty calculation: Measurement of the attenuation of an optical connector

Introduction: The IEC 61300-3 series is a library of measurement methods for fibre optic passive components. These standards describe the necessary equipment and procedures to measure a specific quantity. The uncertainty budget of every measurement is a key parameter, which should be determined by applying dedicated statistical methods as extensively presented in reference documents like ISO/IEC Guide 98-3:2008. This technical report shows a possible simple application of these methods for the determination of the measurement uncertainty of optical low loss connector attenuation measurements as defined in IEC 61300-3-4. A detailed analysis of the main uncertainty contributions for single and for repeated measurements is shown, and a full mathematical development of the uncertainty budget is given in Annex B. The difference in uncertainty estimation for the measurement of an optical connection compared to the measurement of an optical connector against a reference connector is also discussed. The reference document for general uncertainty calculations is ISO/IEC Guide 98-3:2008 and this report does not intend to replace it, it only represents an example and should be used in combination with ISO/IEC Guide 98-3:2008. A brief introduction to the determination of a measurement uncertainty according to ISO/IEC Guide 98-3:2008is given in Annex A. Uncertainty calculations should preferably be performed using a linear representation of the relevant quantities. In this document all calculations are

Scope: This Technical Report represents a selected example that concerns the measurement of the attenuation of passive optical components (IEC 61300-3-4), particularly focussed on insertion method B for low-loss optical connectors assembled on SM optical fibre (according to IEC 60793-2-50, Type B1.3).

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TR 62627-04-2012 PDF

IEC TR 62627-04-2012 PDF

$100.88 $201.76