IEC TR 62679-5-1-2017 PDF

IEC TR 62679-5-1-2017 PDF

Electronic paper displays-Part 5-1: Legibility of EPD in spatial frequency

$72.51 $145.02 -50%
Product Code: IEC TR 62679-5-1
Stock In Stock
Edition: 1.0
Published: 07/2017
Number of Pages: 24
File Size: 1 file, 629 Bytes

Available Options

Product Description

Electronic paper displays – Part 5-1: Legibility of EPD in spatial frequency

Introduction: A small device for an electronic paper display (EPD)[1] 1 was invented in 1997, and its first product as an electronic book was brought to the market in 2004. This product was the first electronic display which made human beings serious about reading letters and figures as well as those printed on a paper with ink. A definition of “electronic paper” was first given by N. K. Sheridon et al of PARC in 1998, as follows: Plane paper scatters light diffusely and efficiently, allowing for high contrast, high resolution images that can be viewed from broad angles without glare caused by specular reflection, in contrast, electronic display media can provide the extra benefits of reusability and easy integration into digital electronic systems. Electronic display media used in such a fashion can be called “electronic paper” [2]. For these reasons, the benchmark for estimation of EPD has always been printed paper. The human action of reading is basically analysed through two subjective attributes, that is, legibility and readability. The legibility, as defined at 3.1.2, can be rated and analyzed by means of measuring optophysical or radiometric property of a certain pattern. This pattern is recognised by the retina as an aggregation of spatial frequencies. Legibility can be understood by analysing those kinds of spatial frequency. In 1967, the contrast sensitivity of the human eye for sinusoidal illuminance changes was measured as a function of spatial frequency [3]. As for readability

Scope: This part of IEC 62679, which is a technical report, specifies the legibility in terms of contrast, spatial frequency, and reflection of the screen as a function of the physical parameters of an EPD. This legibility evaluation model is introduced through both subjective and objective assessments. The scope of this document is restricted to EPDs using segment, passive, and active matrixes with monochromatic type displays. References There are no normative references in this document. Terms, definitions and abbreviated terms 3.1 Terms and definitions For the purposes of this document, the following terms and definitions apply [16]. ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: available at http://www.electropedia.org/ [4] ISO Online browsing platform: available at http://www.iso.org/obp 3.1.1 contrast sensitivity test chart [5,6] CSC chart for measuring and quantifying visual sensitivity in terms of contrast sensitivity and spatial frequency response, which contains a multiplicity of grating patches whose contrast, in term of luminance, varies sinusoidally for differing spatial frequencies Note 1 to entry CSC is sometimes used for diagnosis in ophthalmology clinics. 3.1.2 legibility ability for unambiguous identification of single characters or symbols that may be presented in a non-contextual format [SOURCE: ISO 9241-302:2008, 3.3.35] [7] 3.1.3 readability characteristics of a text presentation on a display that affect performance when groups of characters are to be easily discriminated, recognized and interpreted [SOURCE: ISO 9241-302:2008, 3.3.38] [7]

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TR 62679-5-1-2017 PDF

IEC TR 62679-5-1-2017 PDF

$72.51 $145.02