Professional tape-less camera recorder
Introduction: During the last few years, various types of tape-less camera recorders with different formats have emerged to the broadcast and professional video market. It is desirable to ensure interoperability and to establish its operation. The stage 0 project “Professional tape-less camera recorder” was established to meet these requirements and the purpose of this project was to study the possibility of standardization of this type of products in the current market. The initial step of study was to understand the current status of the products in the market. (Performance comparison is out of the scope of this Technical Report.) This Technical Report was created as a summary of the project and includes the result of the product survey along with the possibility of standardization. Although the investigation is limited to the products in the market, it does not obstruct or exclude standardization of future products.
Scope: This Technical Report summarizes the results of the study on products and market status of professional tape-less camera recorders. This report also includes the guideline on the possibilities of standardizations for professional tape-less camera recorders, including the following components: codec; file format; metadata; recording media; interface. NOTE 1 Each professional tape-less camera recorder used for the product survey is defined as “PRODUCT”. NOTE 2 Since each PRODUCT is also defined as a “product series” of each manufacturer, PRODUCT may include two or more models with different product specifications. NOTE 3 Some of the names described in this report represent a trademark or registered trademark of the respective companies. However, symbols such as TM and ® are omitted in this report. NOTE 4 The interface specifications investigated in this project were limited to a file transfer or compressed bit stream transfer since this report is focusing on a file-based specification. NOTE 5 The detail specification of each PRODUCT is shown in Annex A. Result of product survey 2.1 General In this report, eight types of PRODUCTs for investigation are listed, based on the information given by camera recorder manufacturers. 2.2 Codec 2.2.1 Video codec Each PRODUCT uses efficient video compression formats such as MPEG-2, MPEG-4 AVC/H.264, JPEG2000 and DV. Since these specifications are defined as international standards of ISO/IEC, they can be referred to as a normative reference. The video compression format of PRODUCT-C is defined as SMPTE standard and is also defined as an IEC standard for digital VTR format. It can therefore also be referred to as a normative reference. Since all the compression formats listed in Table 1 are a well-known codec scheme and widely supported in industry, compatibility is ensured with equipment other than camera recorders.
Contents:
- FOREWORD
- INTRODUCTION
- Scope