Printed electronics – Part 302-5: Equipment – Inkjet – Significant characteristics of inkjet printing
Introduction: Until recently, inkjet technologies were used only for imaging printing (conventional ‘graphic printing’). However, the recent development of inkjet technologies, such as technologies for inkjet print-head, functional ink, or print-head driving technologies, now makes it possible to apply these technologies for another area called functional printing, such as printed electronics. Unlike conventional imaging printing, functional printing requires to have a very precise ink drop position so as to bring a functionality to what is produced. If the ink drop position is not exact, the expected function cannot be realized because the electronic connection secured by the ink drop position is vital for the electronic function of the final product. For example, when producing 2 000 imaging pixels by 1 000 imaging-pixels display, that display would have at least 2 000 × 1 000 = 2 000 000 active-matrix circuitries in order to show an image by that display. In addition, and because of the complexity of the above-mentioned circuitries, functional printing requires a higher resolution. Usually, an active-matrix circuitry consists of several active and passive electrical components, such as transistors and capacitors. Each component is usually made (or printed) using certain layers of different printed materials. Any printing defect in an active-matrix circuitry will be catastrophic for the performance of the printed device, such as shorted circuitry; when that display shows a uniform image,
Scope: This part of IEC 62899 provides the significant characteristics, parameters and system properties that are relevant for functional inkjet printing for printed electronics. Where possible, existing measurement standards and specifications are cited.
Contents:
- FOREWORD
- INTRODUCTION
- Scope