Electronic display devices – Part 3-2: Evaluation of optical characteristics – Mura
Introduction: Electronic displays, for example liquid crystal displays (LCDs), plasma display panels (PDPs), organic light emission displays (OLEDs), and so on, have grown popular as displays for high- quality images. It is therefore increasingly important to measure the image quality of electronic displays. One factor degrading the image quality is non-uniformity, known as ‘mura’. The mura is classified into three types. The first is luminance mura, the second is colour mura. The third is called merely “mura” and includes luminance mura and colour mura simultaneously. It is impossible to recognize luminance mura and colour mura as completely separate objects. Various measurement methods about luminance mura and colour mura have been reported in various academic conferences. There are also some standards for these mura. For example, uniformity of luminance and chromaticity are specified in IEC IEC 61747-30-1, SEMU (SEMI mura) is specified in SEMI D31-0213 and uniformity measurement is specified in IDMS ver.1.03 sec. 8. However there is no report which clearly provides the quantitative method for the mura that is called merely “mura” (see Annex D). Therefore the majority of electronic display manufacturers are still using the limit sample for visual inspection. This Technical Report, which intends to verify one mura measurement method, shows the detailed mura measurement method and its inspection experiment results. The International Electrotechnical Commission (IEC) draws attention to the
Scope: This part of IEC 62977, which is a Technical Report, provides an optical measuring method of mura for electronic displays. It defines general measuring procedures for mura measurement and an evaluation method of electronic displays.
Contents:
- FOREWORD
- INTRODUCTION
- Scope