Flexible printed circuit boards (FPCBs) – Method to decrease signal loss by using noise suppression materials
Introduction: In recent years, since the use of smart phones, and other mobile and display devices has increased significantly, the supply of FPCBs has also been largely extended. Specifically, since the FPCB devices seek high speed performance, the requirements with respect to electromagnetic interference (EMI) suppression in the devices has also grown in importance. Therefore, FPCBs used inside smart phones employ noise suppression materials (NSMs) to solve EMI problems, as shown in Figure 1. Figure 1 – Bare/shield FPCB However, an application of noise suppression materials (NSMs) for FPCBs reaches the limit concerning the problem of incrementation of signal loss. Therefore, FPCB and NSMs manufacturers need to analyse signal loss variations of FPCBs shielded by NSMs, as shown in Figure 2. Figure 2 – Increment of signal loss using NSMs As FPCBs are used with high frequency, the problem of signal loss becomes more significant. As the user of FPCBs has a demand for the lowest value of signal loss by using NSMs, suppliers of FPCBs have to anticipate an appropriate design in order to achieve an adequate signal loss value. IEC Transmission loss (dB) Frequency (GHz) Bare FPCB Shield FPCB IEC
Scope: This Technical Report specifies a guideline for improvement of signal loss by using noise suppression materials (hereafter referred to as NSMs) for FPCBs. This Technical Report also indicates a measuring method of signal loss variations of FPCBs using NSMs using network analyzer equipment. In addition, this method only measures the value of the signal loss variation by using NSMs for FPCBs. This report, however, neither determines nor indicates the structure or material of FPCBs.
Contents:
- FOREWORD
- INTRODUCTION
- Scope