Durability test methods for electronic displays – Part 2-12: Environmental tests – Environmental conditions of use, storage and transportation of electronic displays
Introduction: The IEC 63211 series covers the durability test methods of electronic displays and related components. This series describes the evaluation of resistance of two or more electronic displays and their related components to environmental stress, mechanical stress, a combination of environmental and mechanical stress, contact with chemicals, and other stresses. This part of IEC 63211 focuses on environmental aspects and describes the environmental conditions of displays, when in use, stored or transported. The main environmental factors that influence the durability of electronic displays are the temperature and relative humidity of the air and the level of light exposure. These factors have been described in the IEC 60068 series as the general conditions of environmental testing for electrotechnical products. However, in the IEC 60068 series, the conditions are merely listed and cover an extremely wide range of diverse values. For example, the conditions of dry heat temperature are stipulated in IEC 60068-2-2 [1] 1 as the range from 30 °C to 1 000 °C. They are merely listed as a series of temperature values such as, (30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 100, 125, 155, 175, 200, 250, 315, 400, 500, 630, 800 and 1 000) °C. Temperatures of several hundreds of degrees are too severe to maintain the original functions of most electronic displays, and so these elevated temperatures have no valuable meaning as a test condition. Therefore, environmental tests for electronic d
Scope: This part of IEC 63211 provides data and information on the environmental conditions when electronic displays are used, stored and transported. This document covers the temperature, relative humidity and light of the environment of electronic displays. The information provided by this document is related to the following electronic displays: a) indoor displays for consumer homes and offices, such as TVs or PC monitors, b) indoor displays for commercial applications, such as signage and show cases, c) mobile displays, such as smartphones, tablets, e-books and mobile PCs, d) wearable displays, such as eyewear displays and smart watches, e) in-vehicle displays, and f) outdoor displays, such as signage for public information and advertising.
Contents:
- FOREWORD
- INTRODUCTION
- Scope