IEC TR 63434-2023 PDF

IEC TR 63434-2023 PDF

Low voltage switchgear and controlgear-Partial discharge voltages and PD-level in low voltage switchgear and controlgear

$163.93 $327.86 -50%
Product Code: IEC TR 63434
Stock In Stock
Edition: 1.0
Published: 09/2023
Number of Pages: 44
File Size: 1 file, 3 Bytes

Available Options

Product Description

Low voltage switchgear and controlgear – Partial discharge voltages and PD-level in low voltage switchgear and controlgear

Introduction: The application of this document is intended to provide awareness about partial discharge phenomena. Special emphasis is given to the electrical field stress through solid insulation as it relates to the risk of insulation failure. IEC 60664-1[1] 1 is only providing requirements for partial discharge testing of solid insulation when the peak value of the operational voltage exceeds 700 V and the average field strength is higher than 1 kV/mm. However, in practice, partial discharge testing gives random results below 4 kV/mm, mainly because of the intrinsic fluctuation of PD inception voltage in gaps, the variations of the shape and size of the internal voids in solid materials, and the large influence of the temperature and humidity on the material characteristics. Therefore, this document is providing guidance related to the proper design of the insulation and the selection criteria of the material. ___________ 1 Numbers in square brackets refer to the Bibliography.

Scope: This document is intended to provide awareness about partial discharge phenomena. This document gives guidance for some conditions when partial discharge can occur in low voltage switchgear and controlgear connected to networks of up to 1 000 V AC. Internal operational voltages can exceed these values. This document gives guidance on the design of conductors and dimensioning of insulation exposed to electrical fields. This document explains the partial discharge phenomena considering electrical field stress, type of insulation material and other construction parameters, such as the voltage, frequency, temperature, humidity and the distances within the device. This document does not cover: phenomena associated with semiconductor power switching by effects on equipment placed downstream of semiconductor power switching systems; partial discharge test procedures (see IEC 60270) [2]; pure DC systems which are under consideration; selection of solid insulation material.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TR 63434-2023 PDF

IEC TR 63434-2023 PDF

$163.93 $327.86