IEC TS 60034-24-2009 PDF

IEC TS 60034-24-2009 PDF

Rotating electrical machines-Part 24: Online detection and diagnosis of potential failures at the active parts of rotating electrical machines and of bearing currents-Application guide

$100.88 $201.76 -50%
Product Code: IEC TS 60034-24
Stock In Stock
Edition: 1.0
Published: 09/2009
Number of Pages: 48
File Size: 1 file, 1010 Bytes

Available Options

Product Description

Rotating electrical machines – Part 24: Online detection and diagnosis of potential failures at the active parts of rotating electrical machines and of bearing currents – Application guide

Introduction: Progress in design and technology has resulted in an increasing reliability of rotating electrical machines, but failures could not be eliminated completely. Since the demand for a high availability is permanently increasing, it is essential to detect deficiencies at an early stage and to recognize the origin and identify the severity of the fault in order to estimate the risk of a continuation of operation. It would be advantageous, if the signals which are obtained by the detection methods presented in this guide, were suitable to distinguish the different failures from each other. By this means, the signal analysis can be used as input data of a complete monitoring system. The aim of this guide is to present possible tools which are available for the intended purpose and to explain their advantages and disadvantages. The minimum requirements which shall be met by the various sensors will be discussed, whereas the detailed design rules are outside the scope of this technical specification. This guide deals with the detection of failures at the active parts of multi-phase rotating machines (all kinds of winding faults in stator and rotor, cage deficiencies, eccentricities) and of bearing currents.

Scope: This part of IEC 60034 is applicable to the on-line detection and diagnosis of failures at the active parts of multi-phase rotating electrical machines (induction and synchronous machines) and of bearing currents. The failure analysis includes: interturn faults; phase-to-phase short-circuits; double earth faults and single earth faults of motors with earth connection of the star- point; static and dynamic eccentricities; cage imperfection or defects (e.g. broken bars or end-rings); bearing currents. This can be achieved by tools like search coils or other magnetic sensors or partly by the analysis of the terminal voltages and currents. The detection of the following effects is excluded from the scope: vibration (covered by ISO standards, e.g. ISO 10816 and ISO 7919); partial discharge (covered by IEC 60034-27); single earth-faults of motors without earth connection of the star-point; core imperfection. Also excluded are special methods applicable for specific applications only (e.g. turbo generators).

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TS 60034-24-2009 PDF

IEC TS 60034-24-2009 PDF

$100.88 $201.76