IEC TS 60076-20-2017 PDF

IEC TS 60076-20-2017 PDF

Power transformers - Part 20: Energy efficiency

$163.93 $327.86 -50%
Product Code: IEC TS 60076-20
Stock In Stock
Edition: 1.0
Published: 01/2017
Number of Pages: 40
File Size: 0 files

Available Options

Product Description

Power transformers - Part 20: Energy efficiency

Introduction: The reason prompting the preparation of this document is the need to save energy and to reduce the emission of greenhouse gases. The objective of this document is to promote a higher average level of energy performance for transformers. It provides a basic model for national standards and, alternatively, a supplement to national standards that do not cover the whole range of transformers. This part of IEC 60076 gives methods of specifying a transformer with an appropriate level of energy efficiency according to the loading and operating conditions applicable. It also gives minimum efficiency and maximum losses which lead to a generally acceptable balance between losses and use of other resources. This document proposes two methods (A and B) of defining an energy efficiency index and introduces three methods of evaluating the energy performance of a transformer. These are based on existing regional practices: a) the Peak Efficiency Index (PEI) which should be used in conjunction with either a total cost of ownership (TCO) approach or any other mean of specifying the load factor. b) the no-load and load losses at rated power for rationalization of transformer cores and coils for transformers generally produced in large volumes; c) the efficiency at a defined power factor and particular load factor (typically at 50 %). The appropriate method is chosen by agreement between purchasers and manufacturers or according to local regulations. A transformer that does not comply with this

Scope: This part of IEC 60076 is applicable to transformers in the scope of IEC 60076-1. The energy performance levels given in Clause 6 are not applicable to the following transformers: transformers for high current rectifiers as described in the IEC 61378 (all parts) and in the IEC 60146 (all parts); transformers for furnace applications; transformers for offshore applications; NOTE 1 Transformer to be installed on fixed or floating offshore platforms, offshore wind turbines or on board of ships and all kind of vessels). transformers for emergency or temporary mobile installations; NOTE 2 Transformers designed only to provide cover for a specific time limited situation when the normal power supply is interrupted either due to an unplanned occurrence such as failure or a station refurbishment, but not to permanently upgrade an existing substation. traction transformers; earthing transformers as described in 3.1.10 of IEC 60076-6:2007. phase shifting transformers; instrument transformers (IEC 61869-1); transformers and auto-transformers specifically designed for railway feeding systems, as defined in EN 50329; traction catenary supply transformer for 16,67 Hz; transformer for high current rectifiers (IEC 61869-1); NOTE 3 These are transformers specifically designed and intended to supply power electronic or rectifier loads specified according to IEC 61378-1. NOTE 4 This exclusion does not apply to transformers intended to provide AC power from DC sources such as transformers for wind turbine and photo voltaic applications as well as transformers designed for DC transmission and distribution applications.” transformers for railway feeding systems (EN 50329); subsea transformers; starting-, testing- and welding transformers; starting transformers, specifically designed for starting three-phase induction motors so as to eliminate supply voltage dips; NOTE 5 Examples are transformers that are de-energised during normal operation, used for the purpose of starting a rotating machine). transformers specifically designed for explosion-proof and underground mining applications; transformers which cannot fulfil the energy performance requirements due to unavoidable size and weig

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope
  • 50 Hz efficiency
  • 60 Hz efficiency

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TS 60076-20-2017 PDF

IEC TS 60076-20-2017 PDF

$163.93 $327.86