IEC TS 60815-4-2016 PDF

IEC TS 60815-4-2016 PDF

Selection and dimensioning of high-voltage insulators intended for use in polluted conditions-Part 4: Insulators for d.c. systems

$132.41 $264.81 -50%
Product Code: IEC TS 60815-4
Stock In Stock
Edition: 1.0
Published: 10/2016
Number of Pages: 34
File Size: 1 file, 849 Bytes

Available Options

Product Description

Selection and dimensioning of high-voltage insulators intended for use in polluted conditions – Part 4: Insulators for d.c. systems

Introduction: Work has been going on in CIGRE C4.303 and the IEC to produce d.c. pollution design guides that represent the current state of the art. The CIGRE work has resulted in an HV d.c. Pollution Application Guidelines brochure [1] and the IEC work in this final part of IEC 60815 – Selection and dimensioning of high-voltage insulators intended for use in polluted conditions – Part 4: Insulators for d.c. systems. The work represents a huge accumulation of pollution performance knowledge from various sources (both published and unpublished) never before collated into a single opus. Contrary to the parts of IEC 60815 dealing with a.c., this technical specification covers both polymeric and glass and porcelain insulators for d.c. systems in a single publication. It also covers hybrid insulators (the ceramic core is fully covered by a polymer). NOTE The present document does not apply to insulators with coatings, due to the variety of coatings to be considered. This may be reconsidered at the next revision of this technical specification, after gaining more knowledge and experience and a better definition of the coating characteristics and requirements. The approach for d.c. insulator design and selection with respect to pollution given in this part is different to that used for a.c. The key differences are: A simplified approach is presented which is intended for preliminary design. However, since under d.c. pollution build-up and its effects can be more severe than under a.c., the final

Scope: This part of IEC 60815, which is a Technical Specification, is applicable as first approach for the determination of the required d.c. Unified Specific Creepage Distance for insulators with respect to pollution. To avoid excessive over or under design, existing operation experience should be compared and eventually additional appropriate tests may be performed by agreement between supplier and customer. It is applicable to: Glass and porcelain insulators; Composite and hybrid insulators with an HTM or non-HTM housing. This part of IEC 60815 gives specific guidelines and principles to arrive at an informed judgement on the probable behaviour of a given insulator in certain pollution environments. The structure and approach of this part of IEC 60815 are similar to those explained in Part 1, but adapted for the specific issues encountered with polluted HV d.c. insulation. The aim of this Technical Specification is to give the user simplified means to: Identify issues specific to d.c. applications that can affect the choice and design process; Determine the equivalent d.c. Site Pollution Severity (SPS) from measurements, correcting for electrostatic effects, diameter, pollution distribution and composition; Determine the reference USCD for different candidate insulating solutions, taking into account materials, dimensions and risk factors; Evaluate the suitability of different insulator profiles; Discuss the appropriate methods to verify the performance of the selected insulators, if required; This simplified process is intended to be used when comparable operational experience from existing d.c. system is incomplete or not available. The simplified design approach might result in a solution that exceeds the physical constraints of the project. More refined approaches for such cases, e.g. using a statistical approach, are given in the CIGRE d.c. guidelines [1]. In extreme cases, e.g. for exceptionally severe site conditions, alternative solutions such as changing the line route, relocation of converter stations or using an indoor d.c. yard may need to be considered.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TS 60815-4-2016 PDF

IEC TS 60815-4-2016 PDF

$132.41 $264.81