Safety of Laser Products - Part 7: Safety of Products Emitting Infrared Optical Radiation, Exclusively Used for Wireless "Free Air" Data Transmission and Surveillance
Introduction: Probably because of the increasing radiation power available from LEDs, and their physical similarity to laser diodes, these devices have been included in the scope of the laser safety standard IEC 60825-1. However, the optical radiation from LEDs differs in various aspects from laser sources; generally, they lie between incoherent broadband sources, and coherent laser sources. The safety philosophy and classification requirements of IEC 60825-1, developed for coherent point sources (with the assumption of Gaussian radiation characteristics), has been transferred to incoherent intermediate sources (with typically Lambertian radiation characteristics) which are often made for intentional viewing. The result has been an overestimation of the real risk from this kind of source. In Europe, and effective since January 1997, EN 60825-1, which includes LEDs, is valid. According to the European product safety laws, this means that each LED product has to be classified under single-fault conditions. IEC technical committee 76 (jointly with subcommittee 100C/working group 17) was established with the objective of preparing additional parts to the 60825 series, for specific application- related requirements. Due to problems with LED source, the basic standard IEC 60825-1 is also under consideration and technical development. If a new edition of IEC 60825-1 with a changed safety philosophy becomes valid in the future, it will influence all subsidiary standards. This development will infl
Contents: