IEC TS 61496-5-2023 PDF

IEC TS 61496-5-2023 PDF

Safety of machinery-Electro-sensitive protective equipment-Part 5: Particular requirements for radar-based protective devices

$186.00 $371.99 -50%
Product Code: IEC TS 61496-5
Stock In Stock
Edition: 1.0
Published: 08/2023
Number of Pages: 55
File Size: 0 files

Available Options

Product Description

Safety of machinery – Electro-sensitive protective equipment – Part 5: Particular requirements for radar-based protective devices

Introduction: Electro-sensitive protective equipment (ESPE) is applied to machinery presenting a risk of personal injury. It provides protection by causing the machine to revert to a safe condition before a person can be placed in a hazardous situation. Each type of machine presents its own particular hazards, and it is not the purpose of this document to recommend the manner of application of the ESPE to any particular machine. The application of the ESPE is a matter for agreement between the equipment supplier, the machine user and the enforcing authority. In this context, attention is drawn to the relevant guidance established internationally, for example, IEC 62046 and ISO 12100. Due to the complexity of the technology, there are many issues that are highly dependent on analysis and expertise in specific test and measurement techniques. In order to provide a high level of confidence, independent review by relevant expertise is recommended. Differences between worldwide frequency allocation can affect some tests due to national regulations.

Scope: Replacement: This part of IEC 61496 provides particular requirements for the design, construction and testing of non-contact electro-sensitive protective equipment (ESPE) designed specifically to provide whole-body detection of a person or persons as part of a safety-related system, employing radar protective devices (RPDs) responsive to diffuse reflection of radar signals for the sensing function using frequency-modulated continuous-wave (FMCW) technique. Special attention is directed to features which ensure that an appropriate safety-related performance is achieved. An ESPE can include optional safety-related functions, the requirements for which are given in Annex A of IEC 61496-1:2020 and Annex A of this document. The requirements given in this document are related to the detection of adult persons being present in an industrial manufacturing environment. This document does not specify the dimensions or configurations of the detection zone and its disposition in relation to hazardous parts for any particular application, nor what constitutes a hazardous state of any machine. It is restricted to the functioning of the ESPE and how it interfaces with the machine. This document does not consider the aspects of a moving RPD application. Additional consideration can be necessary, if the RPD supplier specifies the RPD for use on moving application. Additional requirements and tests can apply if setup of the RPD differs from Figure 2 and Figure 4. NOTE The Radar cross-section stated in this document is based on measurements using horizontal arrangements. Where this document does not contain all necessary provisions, IEC TS 62998-1 is used. For those aspects not considered in this document it is also possible to additionally use provisions from IEC TS 62998-1. Excluded from this document are RPDs that employ electromagnetic radiation outside the range 9 GHz to 81 GHz (identified as subset of band 10 and band 11 in accordance with ITU Radio Regulations). For sensing devices that employ electromagnetic radiation outside this range, this document can be used as a guide. National regulations can limit the available frequencies. This document can be relevant to applicat

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TS 61496-5-2023 PDF

IEC TS 61496-5-2023 PDF

$186.00 $371.99