IEC TS 61827-2004 PDF

IEC TS 61827-2004 PDF

Electrical installations for lighting and beaconing of aerodromes Characteristics of inset and elevated luminaires used on aerodromes and heliports

$100.88 $201.76 -50%
Product Code: IEC TS 61827
Stock In Stock
Edition: 1.0
Published: 05/2004
Number of Pages: 32
File Size: 1 file, 461 Bytes

Available Options

Product Description

Electrical installations for lighting and beaconing of aerodromes Characteristics of inset and elevated luminaires used on aerodromes and heliports

Introduction: Aeronautical ground lighting (AGL) at an aerodrome or heliport provides the pilot of an aircraft with location, orientation and alignment information in adverse visibility conditions and at night. This includes those aircraft in flight, i.e. on approach to or take off from the aerodrome, and those aircraft and other vehicles moving on the aerodrome surface. The type of lighting is dependent upon the aerodrome operations, type and density of traffic, aerodrome layout and other environmental considerations and may be realised in many different forms. For the purpose of this Technical Specification, the various types of lighting, referred to as AGL services, are considered as components of the overall AGL system. This Technical Specification describes the system component requirements and it deals with the inset and elevated luminaires used in AGL. This Technical Specification should be considered with the AGL requirements produced by the International Civil Aviation Organisation (ICAO). ICAO requirements are published in the form of annexes to the Chicago Convention on International Civil Aviation (1944) to which signatory nations apply to the air traffic and navigation services within their control regions. The annexes contain Standards and Recommended Practices (SARPs), describing performance requirements, based on operational requirements, for the safety, regularity or efficiency of international air navigation. Other ICAO publications contain additional procedures, performa

Scope: This Technical Specification defines the requirements and testing procedures for inset and elevated luminaires with lamps used in aeronautical ground lighting systems and excluding luminaires for general lighting. This Technical Specification is applicable to inset or elevated luminaires used for: approach lights: centreline, crossbars, supplementary approach; runway lights: runway guard, threshold, threshold wingbar, centreline, edge, touch down zone, runway end, stopway lights; taxiway lights : centreline, edge, stopbar, intermediate holding position lights; heliports: aiming point, perimeter, fato luminaires. The purpose of this Technical Specification is to provide a set of requirements and tests, which are applicable to the luminaires and their control equipment. In general, this Technical Specification includes safety requirements for the luminaires. This Technical Specification is not applicable to visual approach slope indicator systems (PAPI (precision approach path indicators) etc.) and signs. Any other equipment not described in this Technical Specification is excluded from its scope.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope
  • 5.10 Optical requirements
  • 5.11 Maintenance requirements
  • 5.12 Accelerated life of luminaires
  • 5.13 Lamp life requirements
  • 5.14 Instruction manual

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TS 61827-2004 PDF

IEC TS 61827-2004 PDF

$100.88 $201.76