IEC TS 61850-80-4-2016 PDF

IEC TS 61850-80-4-2016 PDF

Communication networks and systems for power utility automation-Part 80-4: Translation from the COSEM object model (IEC 62056) to the IEC 61850 data model

$72.51 $145.02 -50%
Product Code: IEC TS 61850-80-4
Stock In Stock
Edition: 1.0
Published: 03/2016
Number of Pages: 22
File Size: 1 file, 561 Bytes

Available Options

Product Description

Communication networks and systems for power utility automation – Part 80-4: Translation from the COSEM object model (IEC 62056) to the IEC 61850 data model

Introduction: IEC 61850 defines communication networks and systems for power utility automation, and more specifically the communication architecture for subsystems such as substation automation systems, feeder automation systems and SCADA for distributed energy resources. In essence, IEC 61850 is a description of the communication architecture for the overall power system management when the combined total of the above mentioned subsystems are considered. The devices in the electricity grid are becoming more intelligent with an increasing number of elements and increasing complexity of data to be processed in a distributed environment. Introduction of comprehensive data models simplifies the handling and management of the data drastically since the models can be re-used once standardized. By defining a number of standardized hierarchical names, it can drastically reduce errors in the field. The names in the standard can be directly used for the configuration of devices and the communication between devices. This part of IEC 61850, which is a technical specification, defines the one-to-one relationship of IEC 62056 OBIS codes to IEC 61850 Logical Nodes. The purpose is to increase the availability of revenue meter information to other applications defined within the IEC 61850 framework. This increased visibility will contribute to information available for smart grid applications. The other benefit of defining these relationships is in regards to the design of protocol converters. With a cl

Scope: Included within the IEC 61850 power utility automation architecture are its concepts, data models, communication protocols and the mapping data exchanges on the substation network. This extends beyond just IEDs to other IEC 61850 enabled devices like meters, system applications and remote access gateways. This part of IEC 61850, which is a technical specification, considers the requirements of power utility automation applications; i.e. the scope is limited by the use cases relevant for meter data exchange in HV/MV substations and MV/LV substations. Only use cases that require the data exchange involving a revenue meter are considered. Applications not covered by the existing standards listed in Clause 2 are out of scope.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TS 61850-80-4-2016 PDF

IEC TS 61850-80-4-2016 PDF

$72.51 $145.02