IEC TS 61944-2000 PDF

IEC TS 61944-2000 PDF

Integrated Circuits - Manufacturing Line Approval - Demonstration Vehicles

$15.77 $31.53 -50%
Product Code: IEC TS 61944
Stock In Stock
Edition: 1.0
Published: 01/2000
Number of Pages: 24
File Size: 1 file, 112 Bytes

Available Options

Product Description

Integrated Circuits - Manufacturing Line Approval - Demonstration Vehicles

Scope: This technical specification establishes the characteristics of standard evaluation components (SEC) used for verifying capability and reliability. Standard evaluation component (SEC) A standard evaluation component (SEC) is a test specimen especially designed or a commercial product taken from production and used for verifying capability (totally or partly) and reliability in accordance with the Process Manual. SECs are used in the qualification test programme to define capability. For maintenance, the tests shall demonstrate the quality aspects and either all the limits of the capability, or those limits of the capability used for products delivered during the most recent period. Two types of components may be used as a SEC: Type I: A component especially designed and manufactured to assess the design rules and the manufacturing process. Type II: A commercial product taken from production. Generally it is not possible to cover all limits and all quality aspects of the capability with a single SEC. Either a single type or a combination of both types may be used, and collectively they shall be adequate for assessing the complete worst case design rules, the materials, manufacturing processes and the quality aspects. Where it is claimed that a diffused/ metallized element, or group of elements, can demonstrate one or more limits, such an element or group of elements shall be measurable separately without being subject to influence from other component elements. The SEC shall be documented, including the design methodology and the software tools used in the design, the functions it is to perform, its size in terms of utilized transistor or gate count and simulations of its performance. Every SEC shall have a detail specification comprising the following requirements: a) Complexity: the complexity of at least one of the SEC types shall contain, as a minimum, one half the number of transistors expected to be used in the largest microcircuit to be built on the qualified manufacturing line. b) Functionality: the SEC shall contain fully functional circuits capable of being tested and screened in a manner identical to that of qualified microcircuits.

Contents:

  • FOREWORD
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TS 61944-2000 PDF

IEC TS 61944-2000 PDF

$15.77 $31.53