Ultrasonics – Field characterization – In situ exposure estimation in finite-amplitude ultrasonic beams
Introduction: Acoustic waves of finite amplitude generate acoustic components at higher frequencies than the fundamental frequency. This provides a mechanism for acoustic attenuation which is not significant at lower acoustic pressure, and for which there is substantial experimental and theoretical evidence (Tables A.1 and A.2). The generation of harmonic frequency components, and their associated higher attenuation coefficient, can occur very strongly when high amplitude pulses, associated with the use of ultrasound in medical diagnostic applications, propagate through water. This fact is of importance when measurements of acoustic pressure, made in water, are used to estimate acoustic pressure in another medium, or when intensity derived from hydrophone measurements in water is used to estimate intensity within another medium. In particular, errors occur in the estimation of the acoustic pressure and intensity in situ, if it is assumed that the propagation of ultrasound through water, and through tissue, is linear. Standards for measurement of frequency-rich pulse waveforms in water are well established (IEC 62127-1). Whilst means to quantify nonlinear behaviour of medical ultrasonic beams are specified, no procedures are given for their use. Since that time IEC 60601-2-37 and IEC 62359 have introduced “attenuated” acoustic quantities, which are derived from measurements in water and intended to enable the estimation of in situ exposure for safety purposes. This Technical Specification d
Scope: This Technical Specification establishes: the general concept of the limits of applicability of acoustic measurements in water resulting from finite-amplitude acoustic effects; a method to ensure that measurements are made under quasi-linear conditions in order to minimise finite-amplitude effects, which may be applied under the following conditions: − to acoustic fields in the frequency range 0,5 MHz to 15 MHz; − to acoustic fields generated by plane sources and focusing sources of amplitude gain up to 12; − at all depths for which the maximum acoustic pressure in the plane perpendicular to the acoustic axis lies on the axis; − to both circular and rectangular source geometries; − to both continuous-wave and pulsed fields; the definition of an acoustic quantity appropriate for establishing quasi-linear conditions; a threshold value for the acoustic quantity as an upper limit for quasi-linear conditions; a method for the estimation of attenuated acoustic quantities under conditions of nonlinear propagation in water.
Contents:
- FOREWORD
- INTRODUCTION
- Scope