Recommendations for renewable energy and hybrid systems for rural electrification – Part 1: General introduction to IEC 62257 series and rural electrification
Introduction: Rural electrification is one of the predominant policy actions designed to increase the well- being of rural populations together with access to clean water, improved healthcare, education, personal advancement and economic development. Several strategies can be adopted to implement rural electrification. Rural electrification can be completed through connection to a national or regional electrification grid. The IEC 62257 series applies to cases where the grid is too far away (too costly) or the individual demand centres are too small to make grid access economic, where autonomous power systems may be used to supply these services. This series IEC 62257 provides technical specifications to different players involved in rural electrification projects (such as project developers, project implementers, installers, etc.) for the setting up of renewable energy and hybrid systems with AC voltage below 1 000 Vac and DC voltage below 1 500 Vdc. These specifications are recommendations: a) to choose the right system for the right place, b) to design the system, c) to operate and maintain the system. The specifications focus on rural electrification concentrating on, but not specific to, developing countries. They must not be considered as all inclusive to rural electrification. That means that they could be used for rural electrification or electrification of remote sites in developed countries also. They try to promote the use of renewable energies in rural areas, but they do not de
Scope: This part of IEC 62257 first introduces a methodology for implementing rural electrification using autonomous hybrid renewable energy systems. Secondly, it provides a guide for facilitating the reading and the use of the IEC 62257 series for setting up decentralized rural electrification in developing countries or in developed countries, the only difference being the level of quality of service and the needed quantity of energy that the customer can afford. The IEC 62257 series is designed as follows: Parts 2 to 6 are methodological supports for the management and implementation of projects. Parts 7 to 12 are technical specifications for individual or collective systems and associated components.
Contents:
- FOREWORD
- INTRODUCTION
- Scope