High-voltage switchgear and controlgear – Part 320: Environmental aspects and life cycle assessment rules for high-voltage switchgear and controlge
Introduction: Increasingly there is a focus on preserving the natural environment for the good of future generations. For this to be achieved, efficient use of energy and materials throughout the life cycle of every product when used in a system and process to conserve the world's finite natural resources is essential. In addition, it is essential that the release of substances and materials that might be harmful for the environment or induce climatic changes be avoided or minimized. From concept to end-of-life of a product, the environmental impact of all the relevant processes should be considered, including the circularities of materials for their future life such as how materials are disposed of or recovered. In order to contribute to conserving natural resources, manufacturers of high-voltage switchgear and controlgear and their assemblies should ensure an environmentally conscious design (ECD) involving: a) phasing-out or minimizing the use of hazardous substances or materials; b) efficient use of energy and materials in the manufacture of products; c) ensuring the lowest practical energy consumption by the products while they are in use; d) ensuring a dependability performance consideration in relation to the reference service life and associated conditions; e) at the end-of-product life, as far as practical, the design should enable recovery of materials for future use and sorting hazardous components requiring a specific treatment. As this approach considers the use of high-voltag
Scope: This part of IEC 62271 provides guidance to suppliers, manufacturers, users, and waste operators of high-voltage switchgear and controlgear as well as their assemblies having a rated voltage above 1 kV AC and 1,5 kV DC, together with their associated auxiliary equipment, on environmentally conscious design, and on assessing environmental impacts when used in systems. This document also gives guidance on effective communication of environmental information throughout the entire life cycle. This document provides guidance on the process and general aspects to select UN sustainable development goals (UN sustainable development goals (SDG)), especially those dealing with health and environmental impacts and their assessments, represented respectively by: SDG 3-Good Health and Well-being; SDG 6-Clean Water and Sanitation; SDG 7-Affordable and Clean Energy; SDG 12-Responsible Consumption and Production; SDG 13-Climate Action; SDG 14-Life Below Water; SDG 15-Life on Land. This document gives guidance on the process and general aspects to implement environmentally conscious product design (ECD) principles, as given in IEC 62430, essential for high-voltage electrical power equipment and power control equipment. This document gives guidance on executing the life cycle assessment (LCA) based on product category rules (PCR) in accordance with IEC 63366, ISO 14040 and ISO 14044 and on applying the Type III environmental declaration in accordance with ISO 14025, both for high-voltage switchgear and controlgear. This guidance provides standardized product specific rules (PSR) summarized as follows: 1) Common rules for the LCA process describing functional units, system boundaries, life cycle inventory analysis, scenarios, environmental impact categories; 2) Common rules for communicating information about the presence of regulated substances and the materials contained in the product, according to IEC 62474; 3) Common rules for communicating information about the end-of-life treatment of the product including material efficiency. This document does not address the environmental declaration programme, however it can be used by program operators. This document focuses on describ
Contents:
- FOREWORD
- INTRODUCTION
- Scope