Electrical insulation systems (EIS) - Thermal evaluation of combined liquid and solid components - Part 1: General requirements
Introduction: This document specifies a method for the thermal evaluation of electrical insulation systems (EISs) for electrotechnical products with combined liquid and solid components. This document covers general test requirements. It is intended that subsequent parts should will cover specific product test requirements. Prior to this document, the procedure for determining the thermal endurance of insulation systems for liquid-immersed products involved one of two processes: firstly, sealed-tube ageing and, secondly, ageing of full-scale models. The ageing of full-scale models is impractical, especially for larger products, such as power transformers. Similarly, the use of sealed-tube ageing is not practical when testing components having drastically different thermal capabilities. For example, testing of a system with a solid material with an RTI of 200 °C with a liquid having a 130 °C thermal capability cannot be performed efficiently. Accelerated ageing temperatures which fairly significantly age the liquid will result in extremely long ageing times for the solid. Accelerated ageing temperatures which fairly significantly age the solid will result in extreme, or even hazardous, ageing of the liquid. This document specifies an accelerated thermal ageing procedure and model that allows for the solid materials to be aged at temperatures separate from the liquid ageing temperatures, all in the same apparatus. The model acts more in the true-life ageing mode of insulation systems, where
Scope: This document specifies a dual-temperature test procedure for the thermal evaluation and qualification of electrical insulation systems (EISs). This document is applicable to EISs containing solid and liquid components where the thermal stress is the dominant ageing factor is dominant, without restriction to voltage class.
Contents:
- FOREWORD
- INTRODUCTION
- Scope