Logic digital integrated circuits – Specification for I/O interface model for integrated circuit (IMIC version 1.3)
Introduction: With an increase in speed of electronic systems, it becomes necessary to accurately predict electrical performance including noise in electronic systems with integrated circuits. Simulators have been used for this purpose. Simulators need accurate models for describing electrical properties of integrated circuits. Semiconductor manufacturers and/or suppliers are required by their users to prepare device models for various simulation tools, some of which are not compatible with SPICE. In addition, since SPICE models contain proprietary process parameters, a non-disclosure agreement is typically required to obtain these from the vendor. IBIS (I/O Buffer Interface Specification) has been proposed as a model for integrated circuits, which, approved as IEC 62014-1, has the following features: since electrical properties of I/O buffers are described in table format, disclosure of proprietary information such as process parameters is drastically reduced; it is easy to get IBIS models that are supported by many simulation tools; a public domain tool can convert SPICE models into IBIS models. However, IBIS models seem to have the following problems: the modeling of power and ground currents is insufficient for accurate power and ground bounce analysis; since an IBIS model has only the final stage at output and input, it is difficult to model the effect of loading on circuit boards on output and input waveforms. The fixed model taken by IBIS has little flexibility for describing other
Scope: The following items are considered to standardize the electrical modeling of input signals, output signals, power supply and ground terminals of integrated circuits, in order to provide for analysis of electrical characteristics of equipment. 1) To standardize in order to solve current problems and in order to extend capabilities of analysis, on the basis of results of the past standardization activities. 2) To define more flexible description rules for electric circuits in order to provide more accurate analysis of printed circuit board. 3) To introduce the concept of modeling levels to exchange relevant data for each application. 4) To enhance electrical modeling for packages and modules.
Contents:
- FOREWORD
- INTRODUCTION
- Scope