Ultrasonics - Output test - Guidance for the maintenance of ultrasound physiotherapy systems
Introduction: The purpose of this document is to establish standard methods for a qualitative check of the performance of ultrasound physiotherapy devices during their lifetime, and to provide guidance on calibration requirements and techniques. To ensure that the ultrasound physiotherapy equipment is in an appropriate condition for use, a regular quality check can be performed. This document defines acceptance, weekly and annual checks. The acceptance test checks the delivery of the device and its performance at the start of its lifetime. The weekly check is a simple qualitative check of device operation. In the annual check, in addition to a qualitative check, a quantitative check is defined. Examples are provided of weekly and annual test reports. This document also gives guidance to the testers concerning the measurement of acoustic output. Annual testing may be performed by a skilled tester, e.g. biomedical engineer, medical physicist, medical device service agent, commercial tester, test house, national measurement institute or manufacturer.
Scope: This document, which is a Technical Specification, describes methods meant to assist users of ultrasound physiotherapy systems in checking the performance of such systems. It is applicable primarily to physiotherapists, general medical practitioners, chiropractors, osteopaths, beauty therapists, sports professionals, biomedical engineers, medical physicists, medical device service agents, commercial testers, test houses or manufacturers. Typical ultrasound physiotherapy systems operate in the range from 0,5 MHz to 5 MHz. Long-wave ultrasound therapy machines operating in the frequency range 30 kHz to 0,5 MHz are not covered by this document.
Contents:
- FOREWORD
- INTRODUCTION
- Scope