Nanomanufacturing - Product specification - Part 2-1: Carbon nanotube-related products - Blank detail specification: single-walled carbon nanotubes in powders and dispersions
Introduction: This document is intended to provide guidance on how to list, illustrate and define various characteristics of single-wall carbon nanotubes (SWCNTs) for use in electrotechnical products, and how to incorporate these into a bilateral detail specification between vendor and user. A particular point of interest is the fact that there are many different types (diameter, chirality) of SWCNTs and various treatments for chemical modification have been developed. Subtle differences in the physical structure give rise to marked differences in electrical, optical and chemical properties; therefore it is important to pay these characteristics special attention. To permit common processing equipment and common unit processes with predictable and reproducible results to be used in multiple fabrication lines, it is essential for the carbon nanotube characteristics to be described and assessed in a standardized manner and to standardize the methods for quality control of the manufacturing processes. To facilitate a reliable source of carbon nanotubes with tailored properties (length, diameter, purity, chirality, conduction type), it is important to specify the characteristics in a standardized way, stating the specification limits and the characterization methods to prove conformance. Accurately measuring and assessing the quality of nanotube-containing materials and the dispersion of nanotubes in liquids or polymers, are both considered crucial for the continued growth of applications inco
Scope: This part of IEC 62565 establishes a blank detail specification and format for listing the relevant key control characteristics (KCCs) of single-wall carbon nanotubes (SWCNTs). This document is intended to be used for SWCNTs in the form of powders and dispersions. For each KCC listed, methods and existing standards (in cases where they are applicable) for their measurement are indicated. Numeric values to be specified for the properties and characteristics are intentionally left blank and are determined by agreement between customer and supplier. Properties and characteristics not of relevance for a specific application can be classified as not applicable or not specified.
Contents:
- FOREWORD
- INTRODUCTION
- Scope