Nanomanufacturing – Product specification – Part 4-4: Nanophotonic products – Blank detail specification: Quantum dot enabled light conversion films
Introduction: This document specifies how to report the various key control characteristics of quantum dot (QD) enabled light conversion film (Q-LCF) for industrial use in nano-enabled optoelectrical display, and how to incorporate these into a bilateral detail specification between vendor and user. QDs are a kind of typical luminescent nanomaterial, which exhibit unique optical properties including narrow emission spectrum, tunable emission wavelength, high peak energy and high quantum efficiency. Q-LCF are optical films with QDs embedded in the polymer matrix. The major function of Q-LCF is converting short wavelength light (such as blue light) to longer wavelength light (green light, red light, etc.); this critical optical characteristic originates from QDs. A type of novel display technique by assembling Q-LCF into traditional LCD devices, QD- LCDs for short, has developed rapidly in recent years. The QD-LCD technique can improve greatly display colour gamut and chromaticity coordinates. These excellent properties are due to QDs in Q-LCF, which make high quality tricolour (red, green, blue) for realizing full-colour display to achieve much better image quality. Comparing with the display performance of traditional LCD techniques, the outstanding advantage of QD-LCDs is unique display colour, which exhibits high colour gamut and colour contrast, this characteristic is decided by the optical and physicochemical performance of QDs and optical physical, mechanical and stability performance
Scope: This part of IEC 62565, which is a Technical Specification, establishes a standardized method to determine a blank detail specification (BDS) for quantum dot enabled light conversion film (Q-LCF). This document is intended to be used for nano-enabled photoelectric display, based on liquid crystal display (LCD). The relevant key control characteristics (KCC) of Q-LCF are listed, including physical, mechanical and optical properties, and stability. For each KCC, measurement methods and existing standards are reported. Numeric values for the KCCs are left blank as they will be specified between customer and supplier in the detail specification (DS). In the DS KCCs can be added or removed if agreed between customer and supplier.
Contents:
- FOREWORD
- INTRODUCTION
- Scope