Nanomanufacturing – Key control characteristics – Part 2-5: Carbon nanotube materials – Mass density of vertically-aligned carbon nanotubes: X-ray absorption method
Introduction: Vertically-aligned carbon nanotubes (VACNTs) are array structures, in which nanotubes are oriented in the perpendicular direction to a substrate surface. VACNTs are useful in many electronic device applications such as field-emission devices, gas and biological sensors, thermal interface materials, supercapacitors, and so on. Chemical vapour deposition (CVD) is one of the common methods for the synthesis of VACNTs, where CNTs can be grown in the presence of metal catalysts, via thermal decomposition of hydrocarbon sources such as methane, ethylene, acetylene, ethanol, and so on. Physical (electrical, thermal, etc.) properties of VACNT films really depend on their density, which is reflected by distribution and alignment behaviours of individual CNTs. The mass density of nanotubes in VACNT samples was evaluated in various ways. The first choice is measuring the sample mass gain, which is successively divided by the height and the area of the VACNT samples for obtaining density values. However, this mass gain method is a destructive method, and is effective only if the mass of CNTs can be measured with a microbalance, so that the mass density can be estimated from the mass gain during the CVD growth. The second method is counting the number of CNTs in scanning electron microscope (SEM) or transmission electron microscope (TEM) images. However, this counting method is less reliable when the nanotubes are not grown straight on the substrate and the density is low. Liquid-induced
Scope: This part of IEC 62607 specifies the protocols for determining the mass density of vertically- aligned carbon nanotubes (VACNTs) by X-ray absorption method. This document outlines experimental procedures, data formats, and some case studies. These protocols are applicable to VACNT films with thickness larger than several tens of micrometres. There are no limitations in materials for substrate.
Contents:
- FOREWORD
- INTRODUCTION
- Scope