Nanomanufacturing – Key control characteristics – Part 2-6: Carbon nanotube-related products – Thermal diffusivity of vertically-aligned carbon nanotubes: flash method
Introduction: Vertically-aligned carbon nanotubes (VACNTs) possess array structures, in which nanotubes are oriented in the perpendicular direction to a substrate surface. Chemical vapour deposition (CVD) is one of the common methods for the synthesis of VACNTs, where CNTs can be grown in the presence of metal catalysts, via thermal decomposition of hydrocarbon sources such as methane, ethylene, acetylene, ethanol, and so on. VACNTs are promising as thermal interface materials in electronics assembly owing to their high thermal conductivity, desirable mechanical properties, and good stability. Thermal transport properties in VACNT films really depend on their distribution and alignment behaviours of individual nanotubes, disorders such as defects and impurities. Thermal diffusivity is one of the key parameters that govern thermal transport properties in solid materials. Flash method is a well-established, standard technique for measuring the thermal diffusivity. Originally, flash method was applicable to homogeneous monolithic (single layer) samples. In fact, some previous works reported thermal diffusivity measurements for self- standing VACNTs that were peeled off from the substrates after the CNT growth. However, VACNT films will be tightly connected to solid substrates in possible practical applications such as thermal interface materials. This means that flash method can not be simply applied to VACNT films grown on solid substrates. Hence, there is a need for new reliable protocols b
Scope: This part of IEC 62607 specifies a protocol for determining the key control characteristic thermal diffusivity for vertically-aligned carbon nanotube (VACNT) films grown on solid substrates by flash method. A light pulse from a flash lamp or a laser is irradiated onto the front surface (substrate side) of the VACNT film on solid substrates. Then, the temperature change of the other side of the specimen is monitored in real time after the pulse irradiation. The thermal diffusivity of the VACNT film can be analysed from the time variation of this temperature change. This method is applicable for evaluating the thermal transport properties of the VACNT films that can be used as thermal interface materials in electronics assembly.
Contents:
- FOREWORD
- INTRODUCTION
- Scope