Nanomanufacturing - Key control characteristics - Part 4-10: Nano-enabled energy storage - Electrochemical characteristics of carbon nanomaterial for the electrodes of electric double-layer capacitors: coin cell method
Introduction: Electrochemical capacitors are widely used in electric vehicles, high-speed trains, aviation, photovoltaics, wind power and electronics, due to their ultra-fast charge/discharge capability, long cycle life, wide working temperature range, high safety and reliability and low maintenance costs. Electric double-layer capacitors (EDLCs) are a category of the electrochemical capacitors. The mechanism of energy storage for EDLCs relies on reversible ion adsorption at the interface between the active material and electrolyte. Therefore, materials with a large specific surface area - such as nanoporous carbon materials - are commonly employed as active materials in EDLCs. Additionally, to enhance electrode conductivity, high-conductivity materials (e.g. carbon black, graphene, and carbon nanotubes/CNTs) serve as conductive agents in EDLCs. Thus, carbon nanomaterials play an irreplaceable and critical role in EDLCs, directly determining their electrochemical performance. The electrochemical performance of the carbon nanomaterial used in EDLC is evaluated using the assembled device, like coin-type EDLCs, three-electrode EDLC cells or cylindrical EDLC cells. Coin-cell-based characterization offers advantages including low cost, versatility, and high efficiency, making it widely used in both academic and industrial settings. This document introduces standard methods to determine the electrochemical key control characteristics of the carbon nanomaterial based on the coin-type EDLCs.
Scope: This part of IEC TS 62607 establishes standardized methods to determine the electrochemical key control characteristics, including: specific capacitance, voltage maintenance rate, endurance in cycling and temperature endurance of carbon nanomaterials by determining the standard coin-type EDLC. The electrochemical key control characteristics are derived by calculating the recording curve at the specific charging and discharging process. The document is applicable for coin-type EDLC assembled from carbon nanomaterials, such as nanoporous activated carbon, carbon aerogel, carbon nanotube, carbon black, graphene, nano graphite sheet, vapor-grown carbon fibre and so on. Typical application areas of this method are research, manufacturer and downstream use to guide material processing and quality control.
Contents:
- FOREWORD
- INTRODUCTION
- Scope