IEC TS 62607-4-2-2016 PDF

IEC TS 62607-4-2-2016 PDF

Nanomanufacturing-Key control characteristics-Part 4-2: Nano-enabled electrical energy storage-Physical characterization of cathode nanomaterials, density measurement

$72.51 $145.02 -50%
Product Code: IEC TS 62607-4-2
Stock In Stock
Edition: 1.0
Published: 10/2016
Number of Pages: 24
File Size: 1 file, 781 Bytes

Available Options

Product Description

Nanomanufacturing – Key control characteristics – Part 4-2: Nano-enabled electrical energy storage – Physical characterization of cathode nanomaterials, density measurement

Introduction: Compared with normal bulk materials, nanomaterials often exhibit many unique properties, such as mechanical, thermal, magnetic, optical and electrochemical properties. Decreasing particle size of the cathode materials, e.g. lithium iron phosphate (LFP), down to nanoscale greatly enhances their electrochemical performance. For example, smaller particle size will shorten the diffusion length of lithium ion during lithium intercalation/de-intercalation process. Higher surface area will increase the electrode/electrolyte contact area, and subsequently improve the high current charge/discharge rates. Furthermore, the particle surfaces may introduce a sub-gap, which can smooth the electrode discharge curve, then help to prolong the cycling life of the electrode. Density is one of the key control characteristics for cathode nanomaterials and affects the performance of electronic energy storage devices significantly. At an appropriate density, the electrochemical performance, such as low-temperature and high-temperature charge/discharge, and the ratio of charge/discharge capability, will be dramatically increased. Among different densities, changing the compacted density of cathode nanomaterials to a suitable value can increase their charge capacity, decrease the internal resistance, lower the polarization effect, increase cycling life of electrical energy storage devices, and improve the usability of electrical energy storage devices. It is important to find the optimum compacted de

Scope: This part of IEC 62607, which is a Technical Specification, provides a standardized method for the determination of the density of cathode nanomaterials in powder form used for electrical energy storage devices. This method provides users with a key control characteristic to decide whether or not a cathode nanomaterial is usable, or suitable for their application. This document includes definitions of terminology used in this document, recommendations for sample preparation, outlines of the experimental procedures used to measure cathode nanomaterial properties, methods of interpretation of results and discussion of data analysis, case studies, and references.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TS 62607-4-2-2016 PDF

IEC TS 62607-4-2-2016 PDF

$72.51 $145.02