Nanomanufacturing – Key control characteristics – Part 4-7: Nano-enabled electrical energy storage – Determination of magnetic impurities in anode nanomaterials, ICP-OES method
Introduction: Magnetic impurities often have significant influence on the performance of anode nanomaterials for nano-enabled electrical energy storage. If anode nanomaterials have high magnetic impurity content, it may lead to serious self-discharge and degrade the performance and cycle life. The magnetic impurities are also easy to aggregate, which can cause safety issues such as internal short-circuit fire, or even explosion. Therefore, accurate evaluation of magnetic impurity content is important for the safety and performance of energy storage devices. [1,2,3]1 Inductively Coupled Plasma Optical Emission Spectrometer (ICP-OES) method is a mature and precise method to measure the concentration of metal elements in the tested materials, but the method to gather the magnetic substance has not been standardized. This document introduces a reliable method for gathering and determining the magnetic impurity content in the anode nanomaterials of an energy storage device. It will help to better control the quality of electrode nanomaterials. This document introduces a determination of magnetic impurities using ICP-OES method for the electrochemical characterization of nano-enabled anode materials for electrical energy storage devices. This standardized method is intended for use in comparing the characteristics of anode nanomaterials in the study stage, not for evaluating the electrode in end products. The method is applicable to materials exhibiting function or performance only possible with
Scope: This part of IEC TS 62607 provides a method for the determination of magnetic impurities in anode nanomaterials for energy storage devices using an Inductively Coupled Plasma Optical Emission Spectrometer (ICP-OES), including test overview, reagents, apparatus, test procedures, test results and test report. This document applies to the determination of the total content of magnetic impurities (iron, cobalt, chromium, and nickel) ≥ 0,02 mg/kg which can be attracted by magnet.
Contents:
- FOREWORD
- INTRODUCTION
- Scope