IEC TS 62607-4-9-2026 PDF

IEC TS 62607-4-9-2026 PDF

Nanomanufacturing - Key control characteristics - Part 4-9: Nano-enabled energy storage - Electrochemical characteristics of carbon nanomaterial for the electrodes of electric double-layer capacitors: Coin cell preparation

$132.41 $264.81 -50%
Product Code: IEC TS 62607-4-9
Stock In Stock
Edition: 1.0
Published: 07/2026
Number of Pages: 32
File Size: 1 file, 2.8 MB

Available Options

Product Description

Nanomanufacturing - Key control characteristics - Part 4-9: Nano-enabled energy storage - Electrochemical characteristics of carbon nanomaterial for the electrodes of electric double-layer capacitors: Coin cell preparation

Introduction: Electrochemical capacitors are widely used in electric vehicles, high-speed trains, aviation, photovoltaics, wind power and electronics, due to their ultra-fast charge/discharge capability, long cycle life, wide working temperature range, high safety and reliability and low maintenance costs. Electric double-layer capacitors (EDLCs) are a type of electrochemical capacitors. The mechanism of energy storage for EDLCs relies on reversible ion adsorption at the active material-electrolyte interface. Therefore, materials with large specific surface area – such as nanoporous carbon materials – are commonly employed as active materials in EDLCs. Additionally, to improve the electrode conductivity, high-conductivity materials (e.g. carbon black, graphene, and carbon nanotubes/CNTs) serve as conductive agents in EDLCs. Thus, carbon nanomaterials play an irreplaceable and critical role in EDLCs, directly determining their electrochemical performance. The electrochemical performance of carbon nanomaterials for EDLCs requires proper electrochemical characterization. Prior to such measurements, the carbon nanomaterials will be pre-assembled into devices such as coin cells, three-electrode cells, or cylindrical cells. Coin-cell-based characterization offers advantages including low cost, versatility, and high efficiency, making it widely used in both academic and industrial settings. The assembly process of a coin-cell EDLC is time-consuming and complex, which typically involves electrode

Scope: This part of IEC TS 62607 establishes a standardized method for assembling coin-cell EDLCs in order to characterize the electrochemical key control characteristic of carbon nanomaterials. The coin-cell EDLC is fabricated through sequential steps: electrode slurry preparation (mixing), coating, rolling, cutting, weighing, and final assembly. The document specifies the assembly process and data recording. The document is applicable for carbon nanomaterials used in EDLC as active material or conductive agents, such as nanoporous activated carbon, carbon aerogel, carbon nanotube, carbon black, graphene, nano graphite sheet, vapour-grown carbon fibre and so on. Typical application areas of this method are research, manufacturer and downstream user to guide material processing and quality control.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TS 62607-4-9-2026 PDF

IEC TS 62607-4-9-2026 PDF

$132.41 $264.81