IEC TS 62607-6-12-2024 PDF

IEC TS 62607-6-12-2024 PDF

Nanomanufacturing-Key Control Characteristics-Part 6-12: Graphene-Number of layers: Raman spectroscopy, optical reflection

$163.93 $327.86 -50%
Product Code: IEC TS 62607-6-12
Stock In Stock
Edition: 1.0
Published: 06/2024
Number of Pages: 36
File Size: 1 file, 1 Byte

Available Options

Product Description

Nanomanufacturing – Key Control Characteristics – Part 6-12: Graphene – Number of layers: Raman spectroscopy, optical reflection

Introduction: Graphene, a single layer of carbon atoms arranged in a honeycomb lattice, has a high potential for future nanotechnology applications due to the excellent conductivity, transparency and flexibility of the material. Many physical properties of graphene and few-layer graphene depend on the number of layers. For example, monolayer and some few-layer graphene admit a linear dispersion relation of electronic bands and consequently show specific quantum hall effect and conductivity. Optical transparency and chemical activity are also related to the number of layers and their stacking angles. Raman spectroscopy is a simple, fast and well-understood technique and has been proposed as a key experimental technique to evaluate the number of layers. The interpretation of Raman measurements however depends on many parameters such as laser wavelength, stacking angles, doping, strain, heating from laser, focus, graphene quality or defect density, residues and substrate. Raman spectroscopy can then not be used alone to determine the number of layers. In this document for the number of layers (N), we combine Raman spectroscopy with optical contrast on high quality graphene deposited on glass substrate and on SiO2-on-silicon substrate. The present procedure is restricted to N ≤ 5. The analysis of the Raman spectra concentrates on two of the most dominating Raman peaks for graphene: the D-peak (around 1 340 cm-1) and the G-peak (1 580 cm-1). High quality graphene samples are characterized by a

Scope: This part of IEC TS 62607 establishes a standardized method to determine the key control characteristic number of layers for films consisting of graphene by Raman spectroscopy and optical reflection. Criteria for the determination of the number of layers are the G-peak integrated intensity and the optical contrast. Both methods enable to distinguish between graphene and multilayer graphene. However, neither method on its own nor the combination of the two enable a determination of the number of layers in all possible cases (especially regarding all possible stacking angles). But the comparison of the values deduced by each method allows to discriminate whether the determined number of layers is correct and can be specified or not. The method is applicable to exfoliated graphene and graphene grown on or transferred to a substrate with a small defect density, low surface contamination (e.g. transfer residue) and number of layers up to 5. The method is suitable for the following substrates: a) glass (soda lime glass or similar with a refractive index between 1,45 and 1,55 at 532 nm); b) oxidized silicon (SiO2 on silicon, with a SiO2 thickness of 90 nm ± 5 nm). NOTE 90 nm and 300 nm are the most used SiO2 thicknesses for graphene substrates. Due to the current state of the art, the method can securely be used for 90 nm ± 5 nm thick SiO2 layers and a laser wavelength of 532 nm, but cannot be fulfilled for 300 nm ± 15 nm SiO2 layers even by changing the laser wavelength. It is possible that future editions of IEC TS 62607-6-12 will include thick layers and other substrates also. The spatial resolution is in the order of 1 µm given by the spot size of the exciting laser.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TS 62607-6-12-2024 PDF

IEC TS 62607-6-12-2024 PDF

$163.93 $327.86