Nanomanufacturing – Reliability assessment – Part 4-1: Nanophotonic products – Optical stability test of quantum dot enabled light conversion films: Temperature, humidity and light exposure
Introduction: Quantum dots (QDs), as luminescent nanomaterials, exhibit broad absorption spectra and narrow emission spectra. Using the same excitation source to excite QDs of different particle size, it is possible to emit spectra with different peak wavelengths. Based on the above characteristics, QDs are used in display products, which can greatly improve the display colour gamut. Nowadays, as a typical product of quantum dot technology application, quantum dot enabled light conversion film (Q-LCF) is widely used in the display field. Under normal working conditions, Q-LCF in a backlight module will be continuously irradiated by high-energy excitation light (such as blue light) to emit converted light. Under the combined action of water vapour and oxygen from the environment, the optical properties of the QDs in Q-LCF will slowly deteriorate. In order to ensure the quality and stability of Q-LCF products, it is essential to scientifically design a reliability test standard to evaluate product quality. Reliability assessment can be used, for example, to authorize advancement to the next step in product development, or to authorize progress payments, or to proceed with delivery and acceptance of products. This document provides reliability test and evaluation criteria for Q-LCF. In this document, Q-LCFs are used as the test objects. Accelerated aging tests containing stress factors of temperature, humidity, light are imposed on the test objects to obtain performance shift data and change
Scope: This part of IEC 62876, which is a Technical Specification, establishes a general reliability testing programme to verify the reliability of the performance of quantum dots nanomaterials, and quantum dot enabled light conversion films (Q-LCFs). The Q-LCF is used as subassemblies for the fabrication of nano-enabled photoelectrical display devices, mainly liquid crystal display (LCD) currently, with other components. This testing programme defines standardized aging conditions, methodologies and data assessment for Q-LCF product. The results of these tests define a stability under standardized aging conditions for quantitative evaluation of the reliability of the Q-LCF. The procedures specified in this document were designed for Q-LCF but can be extended to serve as a guideline for other kinds of light conversion films or related subassemblies as well.
Contents:
- FOREWORD
- INTRODUCTION
- Scope