Safety of machinery – Safety-related sensors used for the protection of persons – Part 3: Sensor technologies and algorithms
Introduction: Applications of automated guided vehicles, service robotics used in public areas or human machine interaction in industries show an increasing demand and use of new sensor technologies and new kinds of sensor functions with respect to hazard exposure of persons. A rapidly increasing number of sensors, with different sensor technologies, are used in these applications to achieve a high degree of automation up to autonomy. The systematic capabilities of such sensors are relevant to reduce the risk of personal injury. Other aspects of functional safety related to sensors as part of control systems are covered by e.g. IEC 61508 (all parts), IEC 62061 or ISO 13849 (all parts). Existing design specific sensor standards set requirements on systematic capabilities for a selected sensor technology and how these can be assessed by analysis and test. The specific requirements are derived from products with limited classes of safety performance and already well-known sensor technology. IEC TS 62998-1 sets general requirements for the development, integration and maintenance of safety related sensors (SRS) and safety related sensor systems (SRSS) applicable to all sensor technologies with special attention to systematic capabilities. IEC TS 62998-1 is appropriate for the risk reduction in accordance with all classes of safety performance in an identified application. First assessments of SRS/SRSS in accordance with IEC TS 62998-1 identified the need for additional guidance for the require
Scope: This part of IEC 62998, which is a technical specification, gives guidance on: analysis of sensor technologies of different wavelength ranges, measurement methods, and the sensing unit arrangement in an SRS, respectively the arrangement of SRSs in an SRSS; representative physical properties of safety-related objects with due consideration of their material characteristics and the sensor technology/technologies used in an SRS/SRSS to achieve the detection capability and comparable results during verification and validation; analysis of the interference of objects present in the surrounding on the safety related objects and thereby the influence on the dependability of the detection capability; use of algorithms during design, development and maintenance to achieve appropriate detection capability and dependability of detection; appropriate use of algorithms during the integration of SRS or SRSS by the integrator to improve execution of measurement information or provide decision information derived from measurement information. If an SRS/SRSS uses sensor technologies not stated in this document, then the generic approach in accordance with IEC TS 62998-1 applies.
Contents:
- FOREWORD
- INTRODUCTION
- Scope