IEC TS 63291-2-2023 PDF

IEC TS 63291-2-2023 PDF

High voltage direct current (HVDC) grid systems and connected converter stations-Guideline and parameter lists for functional specifications-Part 2: Parameter lists

$239.59 $479.18 -50%
Product Code: IEC TS 63291-2
Stock In Stock
Edition: 1.0
Published: 09/2023
Number of Pages: 94
File Size: 1 file, 2 Bytes

Available Options

Product Description

High voltage direct current (HVDC) grid systems and connected converter stations – Guideline and parameter lists for functional specifications – Part 2: Parameter lists

Introduction: In the preparation of this document, special care has been taken to as far as possible describe the requirements in a technologically independent way. In order to achieve that, a function of interest is described by a comprehensive set of parameters. The parameters are selected based on a systematic analysis of physical phenomena relevant to achieve the requested functionality. Reflecting the early stage of technology, the technical parameters need comprehensive explanations and background information. This need is reflected in the dual character of the content, which is presented in the two corresponding parts: IEC TS 63291-1, Guideline containing the explanations and the background information in context with the parameter lists; IEC TS 63291-2, Parameter lists containing the essential lists of parameters and values describing properties of the AC as well as the DC system (operating conditions) and parameters describing the performance of the newly installed component (performance requirements). IEC TS 63291-1 and IEC TS 63291-2 have the same structure to aid the reader. At the time of writing there is no real-life multi-national, multi-vendor HVDC grid project to which the guideline and parameter lists can be applied. Practical experiences in the near future are expected to provide input for developing these guideline and parameter lists further.

Scope: This document defines aspects on planning, specification, and execution of multi-vendor HVDC grid systems also referred to as HVDC grids. The terms "HVDC grid systems" or "HVDC grids" are used in this document to describe HVDC systems for power transmission having more than two HVDC stations connected to a common DC circuit. The DC circuit can be of radial or meshed topology or a combination thereof. In this document, the term "HVDC grids" is used. While this document focuses on requirements specific for HVDC grids, some requirements are considered applicable to all HVDC systems in general, i.e., including point-to-point HVDC systems. Existing IEC (e.g., IEC TR 63363-1 [1]), Cigre or other relevant documents have been used for reference as far as possible. Corresponding to electric power transmission applications, this document is applicable to high voltage systems, i.e., those having typically nominal DC voltages higher than 50 kV with respect to earth are considered in this document. NOTE While the physical principles of DC networks are basically voltage independent, the technical options for designing equipment get much wider with lower DC voltage levels, e.g. in the case of converters or switchgear. This document covers technical aspects of: coordination of HVDC grid and AC systems, HVDC grid characteristics, HVDC grid control, HVDC grid protection, AC/DC converter stations, HVDC grid installations, including DC switching stations and HVDC transmission lines, studies and associated models, testing. Beyond the scope of this document, the following content is proposed for future work: DC/DC converter stations.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TS 63291-2-2023 PDF

IEC TS 63291-2-2023 PDF

$239.59 $479.18