IEC TS 63337-2024 PDF

IEC TS 63337-2024 PDF

Basic qualification of DC-link film capacitors for automotive use-General requirements, test conditions and tests

$163.93 $327.86 -50%
Product Code: IEC TS 63337
Stock In Stock
Edition: 1.0
Published: 02/2024
Number of Pages: 42
File Size: 1 file, 1 Byte

Available Options

Product Description

Basic qualification of DC-link film capacitors for automotive use – General requirements, test conditions and tests

Introduction: This Technical Specification is based on a publication of the "ZVEI/ECPE Film Capacitors Core Group" working group with representatives from vehicle, device and capacitor manufacturers. It is adopted to the electrical specifications valid for electrically propelled vehicles – voltage class B systems, as given in ISO 21498-1. Because AEC-Q200 is not applicable for the capacitors considered here, this document defines a set of tests to ensure the basic suitability of the capacitor for application as a DC-link capacitor in HV applications or in the intermediate circuit of the 48 V on-board electrical system. This Technical Specification makes no claim to completeness. Automotive manufacturers and device manufacturers are free to request additional state-of-the-art tests at any time. It is also important to understand that a basic qualification as described in this document cannot replace a comprehensive technology qualification being performed in advance of product development. As the individual manufacturers can make changes, only the company standards of the respective manufacturers created on the basis of this Technical Specification apply.

Scope: This document provides requirements, test conditions and tests to validate characteristics including the service life of customized DC-link film capacitors for use in motor vehicle components. Standard DC-link capacitors qualified according to other IEC standards or AEC-Q200 are excluded from the scope of this document. The requirements, test conditions and tests listed in this document apply to customized film capacitors developed for use in motor vehicle power electronics for the application as a DC-link capacitor in HV applications or in the intermediate circuit of the 48 V on-board electrical system. These qualification requirements can be expanded or adapted for the application of technologically innovative designs, if necessary. The content and scope of supplements is therefore to be specified and documented in coordination between the responsible parties prior to sourcing. Power electronics in the motor vehicle need to be tested in accordance with the environmental qualification standards of the vehicle manufacturers. The tests in this document do not replace the tests specified in the Component Requirement Specifications for complete vehicle components or additional or deviating further requirements, test conditions and tests described therein. This document contains no tests to validate the thermal interface between capacitors, power electronics and the cooling system on the component level.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TS 63337-2024 PDF

IEC TS 63337-2024 PDF

$163.93 $327.86