IEC TS 63392-2025 PDF

IEC TS 63392-2025 PDF

Fire test for concentrator PV modules

$50.44 $100.88 -50%
Product Code: IEC TS 63392
Stock In Stock
Edition: 1.0
Published: 11/2025
Number of Pages: 20
File Size: 1 file, 1 Byte

Available Options

Product Description

Fire test for concentrator PV modules

Scope: This document, which is a Technical Specification, specifies a test method for evaluating the basic fire behavior of modules used in concentrating systems with a maximum DC system voltage of 1 500 V or less. Since the concentrator module may be exposed to flames due to flying embers or fire may be caused by the module itself due to hot spots or arching (internal fire), the tests outlined in this document are conducted in these two modes. Applicable fire testing may be required by local codes but are not covered in this document. CPV system or CPV modules mounted in or on buildings, shall fulfil national building and construction codes, regulations, and requirements and are not covered by this Technical Specification. If national or local codes define fire test requirements, they should be followed. If such requirements are not available, the following international and national standards give information for tests, which could be used: ISO 5657, ENV 1187-1 to -4, ANSI/UL 790, EN 13501-1. CPV modules that are constructed in the flat plate module format and operate at 3X and less geometric concentration ratio are considered for evaluation to IEC 61730-1, Photovoltaic (PV) module safety qualification – Part 1: Requirements for construction.

Contents:

  • FOREWORD
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TS 63392-2025 PDF

IEC TS 63392-2025 PDF

$50.44 $100.88