DC voltages for HVDC grids
Introduction: While high voltage direct current (HVDC) solutions for bulk power transmission have been developed and implemented commercially since 1954, recent years have seen a strong increase in the number of HVDC projects. There were about 80 commercial projects rated above 50 kV in the five decades until the year 2000. Since then, the use of HVDC technology has rapidly grown to around 200 HVDC systems at the time of writing. This development was accompanied by increasing both the HVDC system voltage and current ratings. While in the 20th century, almost all electrical transmission was performed in AC, at present, network planning activities all over the world are increasingly considering HVDC transmission the technology of choice. This is mainly driven by the response to the climate change and the political commitment, such as European Union’s Green Deal and others to reduce the carbon- dioxide footprint of societies. HVDC power transmission, especially voltage-sourced converter (VSC) HVDC power transmission, provide feasible solutions for the large-scale integration of renewable generation, and electrification of platforms in offshore grids. HVDC systems strengthen the power systems by increasing their power transmission capacity, improving stability and controllability as well as enabling the integration of different electricity markets. VSC HVDC is put forward as the technology for a DC grid, as it supports multiterminal operation with fixed voltage polarity. The current flow direc
Scope: This document provides a recommended DC voltage series for HVDC grids with a DC voltage above 1,5 kV. It concerns the selection of a nominal DC voltage of multi-terminal HVDC power transmission and distribution systems and meshed HVDC networks, grids, rather than a rated DC voltage or highest DC voltage. There is no stringent requirement to consider this DC voltage series for the DC voltage selection for any stand-alone (not forming part of DC Grid) HVDC projects, e.g. a point-to-point HVDC power transmission and distribution system. However, in order to facilitate the later progression towards larger HVDC systems in the future the use of standardized DC voltages is very useful. At later stages, with multi-terminal systems and meshed HVDC grids, the use of harmonized voltages will indeed become essential in order to optimize both capital and operational costs. Also, for entirely new projects, system planning should include this outlook and can benefit from the use of the recommended DC voltage series.
Contents:
- FOREWORD
- INTRODUCTION
- Scope