IEC TS 63493-1-2025 PDF

IEC TS 63493-1-2025 PDF

Transformer bushings dimensional standardization - Part 1: Medium voltage bushings with Um from 12 kV up to and including 52 kV and Ir from 630 A up to and including 3 150 A

$25.22 $50.44 -50%
Product Code: IEC TS 63493-1
Stock In Stock
Edition: 1.0
Published: 12/2025
Number of Pages: 16
File Size: 1 file, 489 Bytes

Available Options

Product Description

Transformer bushings dimensional standardization - Part 1: Medium voltage bushings with Um from 12 kV up to and including 52 kV and Ir from 630 A up to and including 3 150 A

Introduction: The scope of this part of IEC 63493 is to facilitate interchangeability or at least to define some frame conditions (this is not intended to be a mandatory document). Standardization of bushings would bring several benefits, among which: decreasing the number of products to be developed, tested and maintained; leveraging economy of scale with an overall positive effect on product cost and quality; reducing inventories and lead times; simplifying the purchasing process; enabling the interchangeability of bushings produced by different manufacturers; facilitating retrofitting of old products with new ones based on more advanced technologies; etc. This document deals with a specific typology of medium voltage bushings.

Scope: This part of IEC 63493, which is a Technical Specification, specifies the main parameters to facilitate interchangeability or at least to define some frame conditions of MV bushings: – with Um from 12 kV up to and including 52 kV; Ir from 630 A up to and including 3 150 A. This document deals with non-capacitance graded bushings for Power Transformers, according to the IEC 60076 series (usually for transformer with conservator). In this document only liquid to air bushings are considered. Bushings of liquid-to-liquid and air- to-air type and bushings for transformers with air-cushion in tank are not considered. MV is considered up to 52 kV; this value is used to cover specific insulation levels or for high pollution levels, even if the field of application is very restricted. Both solutions with external insulation in porcelain and polymeric can be used and need to enable interchangeability (in terms of mechanical and electrical performance).

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TS 63493-1-2025 PDF

IEC TS 63493-1-2025 PDF

$25.22 $50.44