IEEE 1268-2016 PDF

IEEE 1268-2016 PDF

IEEE Guide for Safety in the Installation of Mobile Substation Equipment

$35.50 $71.00 -50%
isbn 9781504408400
Product Code: IEEE 1268
Stock In Stock
Published: 04/07/2016
Number of Pages: 32
File Size: 1 file, 2.4 MB

Available Options

Product Description

IEEE Guide for Safety in the Installation of Mobile Substation Equipment

Introduction: This introduction is not part of IEEE Std 1268™-2016, IEEE Guide for Safety in the Installation of Mobile Substation Equipment. Prior to the development of this guide, information regarding safe installation and operation of mobile substations was not available from a single source. To provide a single source of information for general transport, set-up, installation, and safe operation of mobile substation equipment, members of Working Group D4 (Substation Safety) unanimously voted to develop a comprehensive guide. The West Coast Subcommittee volunteered to assist in the development of the guide. Accordingly, a project authorization was requested and was approved by the IEEE Standards Board in September 1991 and resulted in the original 1997 edition of this guide and an updated version in 2005. The 2015 revision is the result of several comments received in a previous reaffirmation ballot. This revision addresses those comments, most of which requested clarification or more direct guidance on the installation of mobile substation equipment. This guide was developed with the intent to identify specific areas of concern and offer design assistance in those areas. Recognizing that mobile substations and their installation practices vary widely, the intent of this guide is not to provide a step-by-step set of instructions for individual units. Instead, an attempt was made by the working group to provide generic information on topics and items pertaining to safe installation and

Contents:

  • 1.1 Scope
  • 1.2 Purpose
  • 5.1 General
  • 5.2 Safety criteria
  • 5.3 Items to ground
  • 5.4 Methods of grounding
  • 5.5 Connection to the existing grid
  • 6.1 Planning
  • 6.2 Surface/site preparation
  • 6.3 Preparing the mobile substation for transport
  • 6.4 Placing the mobile substation in service
  • 6.5 Removing the mobile substation from service
  • 7.1 General
  • 7.2 Fence safety clearances
  • 7.3 Warning signs
  • 8.1 General
  • 8.2 Types of transformer failures
  • 8.3 Electrical detection of faults
  • 8.4 Mechanical detection of faults
  • 8.5 Fault clearing
  • 10.1 Area lighting
  • 10.2 Operational external light
  • 10.3 Alarm external light

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEEE 1268-2016 PDF

IEEE 1268-2016 PDF

$35.50 $71.00