IEEE 1531-2020 PDF

IEEE 1531-2020 PDF

IEEE Guide for the Application and Specification of Harmonic Filters

$49.00 $98.00 -50%
isbn 9781504473385
Product Code: IEEE 1531
Stock In Stock
Published: 01/26/2021
Number of Pages: 71
File Size: 1 file, 1.1 MB

Available Options

Product Description

IEEE Guide for the Application and Specification of Harmonic Filters

Introduction: This introduction is not part of IEEE Std 1531-2020, IEEE Guide for the Application and Specification of Harmonic Filters. This guide addresses the specification of the components, protection, and control of harmonic filters. It does not address the proper sizing or configuration of harmonic filters to achieve desired performance. This document provides guidelines for passive shunt harmonic filters for use on 50 Hz and 60 Hz power systems to reduce harmonic distortions and/or to provide capacitive reactive power for load or system compensation. As of publication of this guide, no IEEE standards exist specifically for harmonic filters, although IEEE standards do exist for most of the components that are used in a filter. This revision provides clarification and corrections to the text published in 2003, for example, clarifying the current rating of filter tuning inductors to be consistent with the National Electrical Code® (NEC®) (NFPA 70®) and its current rating of conductors in a capacitor circuit.1 A harmonic filter may also be referred to as a detuned or tuned capacitor bank where the objective is to provide reactive power compensation, with the additional requirement that the design must also avoid excessive amplification of harmonics from the loads or existing power system background harmonics. 1 Information on normative references can be found in Clause 2.

Contents:

  • 1.1 Scope
  • 1.2 Word usage
  • 4.1 General
  • 4.2 Reactive power (kvar) requirements
  • 4.3 Harmonic limitations
  • 4.4 Normal system conditions
  • 4.5 Normal harmonic filter conditions
  • 4.6 Contingency system conditions
  • 4.7 Contingency harmonic filter conditions
  • 4.8 Harmonic filter locations
  • 4.9 Harmonic filter configuration
  • 4.10 Using existing capacitor banks
  • 5.1 General
  • 5.2 Introduction
  • 5.3 Technical specifications
  • 5.4 General design considerations
  • 5.5 Case study
  • 6.1 General
  • 6.2 Introduction
  • 6.3 Harmonic overload considerations
  • 6.4 Major component specifications
  • 6.5 Harmonic filter switching control
  • 6.6 Protection
  • 6.7 Harmonic filter design procedure

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEEE 1531-2020 PDF

IEEE 1531-2020 PDF

$49.00 $98.00