IEEE 1641.1-2013 PDF

IEEE 1641.1-2013 PDF

IEEE Guide for the Use of IEEE Std 1641, IEEE Standard for Signal and Test Definition

$172.00 $344.00 -50%
isbn 9780738183671
Product Code: IEEE 1641.1
Stock In Stock
Published: 06/07/2013
Number of Pages: 324
File Size: 1 file, 4 MB

Available Options

Product Description

IEEE Guide for the Use of IEEE Std 1641, IEEE Standard for Signal and Test Definition

Introduction: This introduction is not part of IEEE Std 1641.1-2013, IEEE Guide for the Use of IEEE Std 1641™, IEEE Standard for Signal and Test Definition. IEEE Std 1641-2010 defines a method of accurately defining signals and their timing as used in test procedures and requirements.a This guide supplements IEEE Std 1641 and is part of the document set. This guide has been prepared to help all users of IEEE Std 1641. The standard may be used within any test discipline, and with any carrier language, and the examples provided herein should be seen as typical. The guide explains how each of the layers in the standard are built up on the preceding (lower) layer and to inform the user how to use the layer (or layers) that are important to a specific application. It describes how a signal may be created from basic signal components (BSCs) or other signals. It also shows the application and measurement of signals using a text-only format. The need for the guide arose from the experience of users in the creation of signals and tests using IEEE Std 1641. This experience showed that further information in the implementation and application of signal definitions was required. The purpose of this guide is to provide guidance in the technique of implementation, application, and usage of the basic signals defined in IEEE Std 1641 to create signal definitions and test requirements. This is seen as particularly important in promoting the use of a relatively new and unambiguous method of describing signa

Contents:

  • 1.1 Scope
  • 1.2 Purpose
  • 3.1 Definitions
  • 3.2 Acronyms and abbreviations
  • 4.1 Requirements for signal and test definition standard
  • 4.2 Features of the standard
  • 4.3 Hierarchy of signal definitions
  • 4.4 Improvements to the standard
  • 4.5 Signals and streams
  • 4.6 Inclusion of support for Automatic Test Markup Language
  • 5.1 Overview
  • 5.2 Physical types
  • 5.3 Signals
  • 5.4 Using signal graphs to create a signal
  • 5.5 Documenting signal descriptions
  • 5.6 Using signal definitions
  • 6.1 General
  • 6.2 TSF model as signal template
  • 6.3 Typical signal model (TSF)
  • 6.4 Using TSFs in a test requirement or program
  • 6.5 Measurement models (signal measurement)
  • 7.1 General
  • 7.2 Sensors
  • 7.3 Measurement maps
  • 7.4 Intrinsic measurements
  • 7.5 Generic measurement
  • 7.6 Reference signals description
  • 7.7 Different valid measurement methods
  • 8.1 Structure—sequence and signals
  • 8.2 Using tools such as graphical environments

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEEE 1641.1-2013 PDF

IEEE 1641.1-2013 PDF

$172.00 $344.00