IEEE 1660-2018 PDF

IEEE 1660-2018 PDF

IEEE Guide for Application and Management of Stationary Batteries Used in Cycling Service

$36.00 $72.00 -50%
isbn 9781504454957
Product Code: IEEE 1660
Stock In Stock
Published: 01/24/2019
Number of Pages: 37
File Size: 1 file, 2.8 MB

Available Options

Product Description

IEEE Guide for Application and Management of Stationary Batteries Used in Cycling Service

Introduction: This introduction is not part of IEEE Std 1660-2018, IEEE Guide for Application and Management of Stationary Batteries Used in Cycling Service. The term “stationary battery” tends to conjure up many interpretations among power engineers, depending on one’s perspectives on battery energy storage. A stationary battery can be operated in two basic modes: 1) standby (or float) and 2) cycling applications including primary-power batteries (i.e., off-grid hybrid power sources), or distributed energy resources applications. Many standards developed for standby applications do not apply to cycling applications, and vice versa, but many users are unaware of the differences between standby and cycling battery operation and maintenance requirements. The purpose of this guide is to differentiate between these two applications and increase awareness of why and how to manage them differently. The guide is primarily informational and is not intended to provide specific recommendations for battery management in cycling applications. The targeted users are the owners, maintainers, and designers of battery systems used in stationary applications. Some cycling applications, particularly those in grid-connected systems, are still emerging, and detailed operational and maintenance procedures are still being developed. The information on photovoltaic applications in this guide can be used as an example of a cycling application where this material has been formalized.

Contents:

  • 1.1 Scope
  • 1.2 Purpose
  • 3.1 Defi nitions
  • 3.2 Acronyms and abbreviations
  • 4.1 Standby versus cycling batteries
  • 4.2 Cycle life
  • 4.3 Charge effi ciency
  • 5.1 General
  • 5.2 Lead-acid battery cell reactions
  • 5.3 Lead-acid cell construction
  • 6.1 Cycling applications
  • 6.2 Charging energy limitations
  • 6.3 Discharge rate and depth of discharge
  • 6.4 Battery sizing issues
  • 6.5 End of battery life
  • 7.1 General
  • 7.2 Charging of lead-acid batteries
  • 7.3 Charging considerations for standby batteries
  • 7.4 Charging considerations for cycling batteries
  • 8.1 General
  • 8.2 Types of battery system maintenance
  • 8.3 Types of battery system capacity tests
  • 8.4 Factors infl uencing battery maintenance and testing procedures
  • 8.5 The existing battery maintenance and testing standards
  • 8.6 Features of these battery standards
  • 8.7 Misapplication of maintenance and testing standards
  • 9.1 General
  • 9.2 Advanced lead-acid
  • 9.3 Nickel-cadmium
  • 9.4 Nickel-metal hydride

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEEE 1660-2018 PDF

IEEE 1660-2018 PDF

$36.00 $72.00