IEEE 1661-2019 PDF

IEEE 1661-2019 PDF

IEEE Guide for Test and Evaluation of Lead-Acid Batteries Used in Photovoltaic (PV) Hybrid Power Systems

$31.00 $62.00 -50%
isbn 9781504460712
Product Code: IEEE 1661
Stock In Stock
Published: 08/13/2019
Number of Pages: 16
File Size: 1 file, 2.4 MB

Available Options

Product Description

IEEE Guide for Test and Evaluation of Lead-Acid Batteries Used in Photovoltaic (PV) Hybrid Power Systems

Introduction: This introduction is not part of IEEE Std 1661-2019, IEEE Guide for Test and Evaluation of Lead-Acid Batteries Used in Photovoltaic (PV) Hybrid Power Systems. Since IEEE Std 1661™ was first published in 2007, off grid hybrid power systems (PV and engine-generator sets) that use lead-acid batteries remain an active practice. This revision to renew this guide allows for re-affirmation of the need for test guidance for this relatively challenging operational scenario; it also establishes a basis for future full revision that may take into consideration a wider range of technologies (e.g., electro chemistries), as well as wider range of charging source configurations. The hybrid power system in this guide refers to a photovoltaic (PV) energy charging source and a dispatchable charging source, such as an engine generator. The hybrid power system designer depends on the capacity of storage batteries for reliable extended operation of the system load to more effectively utilize and store the PV energy and minimize engine generator run-time. PV hybrid systems, which are the most common hybrid systems, can subject batteries to harsh operational environments as a result of insufficient charging, continuous cycling, and temperature extremes. Typical charge rates for PV hybrid systems can range from very low rates near the 100 h rate to high rates near the 6 h rate. The effect on the battery can be significant with respect to heat generation and charge control parameters. In daily operat

Contents:

  • 1.1 Scope����������������������������������������������������������������������������������������������������������������������������������������������������9
  • 1.2 Purpose�������������������������������������������������������������������������������������������������������������������������������������������������9
  • 5.1 Objectives�������������������������������������������������������������������������������������������������������������������������������������������11
  • 5.2 Parameter selection����������������������������������������������������������������������������������������������������������������������������12
  • 5.3 Battery charging parameters���������������������������������������������������������������������������������������������������������������12
  • 5.4 Battery test procedures�����������������������������������������������������������������������������������������������������������������������12
  • 6.1 Battery replacement��������������������������������������������������������������������������������������������������������������������������������

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEEE 1661-2019 PDF

IEEE 1661-2019 PDF

$31.00 $62.00