IEEE 1688-2015 PDF

IEEE 1688-2015 PDF

IEEE Standard Requirements for the Control of Electromagnetic Interference Characteristics of Replaceable Electronic Modules

$85.50 $171.00 -50%
isbn 9780738197623
Product Code: IEEE 1688
Stock In Stock
Published: 09/30/2016
Number of Pages: 171
File Size: 1 file, 4.9 MB

Available Options

Product Description

IEEE Standard Requirements for the Control of Electromagnetic Interference Characteristics of Replaceable Electronic Modules

Introduction: This introduction is not part of IEEE Std 1688-2015, IEEE Standard Requirements for the Control of Electromagnetic Interference Characteristics of Replaceable Electronic Modules. This standard is for use in the specification of electromagnetic performance requirements for replaceable electronic modules (REMs). This standard has been developed in response to changes in the technology used to implement functions and/or subsystems into larger, more complicated integrated systems. The architecture for complex systems and system platforms has evolved in recent years from a collective of stand-alone federated subsystems that each performs a set of functions to a highly integrated rack system that incorporate a backplane and multiple subordinate modules that perform the required functions. Some of the modules are designed for a particular purpose, such as power supply or power distribution, whereas others will provide maximum flexibility by being programmable to perform one or more functions. These modules have become items that are often procured independently from the system rack or frame in which they are designed to reside. For this reason, the module specification requirements have also had to mature to include not only descriptions of the functionality and interfaces required but also operational environment conditions. This standard addresses the module electromagnetic environments, by way of adaptation of the test requirements of MIL-STD-461E.1 Since MIL-STD-461E is intended

Contents:

  • 1.1 General
  • 1.2 Scope
  • 1.3 Purpose
  • 1.4 Structure
  • 1.5 Emission and susceptibility designations
  • 3.1 Definitions
  • 3.2 Acronyms and abbreviations
  • 4.1 General
  • 4.2 Interface requirements
  • 4.3 Verification requirements
  • 4.4 REM test configurations
  • 5.1 General
  • 5.2 EMI control requirements versus intended installations
  • 5.3 Emission and susceptibility requirements, limits, and verification
  • 5.4 CE102M conducted emissions, power, control, and signal leads, 10 kHz to 10 MHz
  • 5.5 CS101M, conducted susceptibility, power supply REM leads, 30 Hz to 150 kHz
  • 5.6 CS103M conducted susceptibility, antenna port, intermodulation, 15 kHz to 10 GHz
  • 5.7 CS104M, conducted susceptibility, antenna port, rejection of undesired signals,
  • 30 Hz to 20 GHz
  • 5.8 CS105M, conducted susceptibility, antenna port, cross-modulation, 30 Hz to 20 GHz
  • 5.9 CS106M, conducted susceptibility, transients, power leads
  • 5.10 CS114M conducted susceptibility, bulk cable injection, 10 kHz to 200 MHz
  • 5.11 CS115M, conducted susceptibility, bulk cable injection, impulse excitation
  • 5.12 CS116M, conducted susceptibility, damped sinusoidal transients, cables, and power leads, 10 kHz
  • 5.13 RE101M, radiated emissions, magnetic field, 30 Hz to 100 kHz
  • 5.14 RE102M, radiated emissions, electric field, 10 kHz to 18 GHz
  • 5.15 RS101M, radiated susceptibility, magnetic field, 30 Hz to 100 kHz
  • 5.16 RS103M, radiated susceptibility, electric field, 30 mHz to 18 GHz
  • 5.17 RS107M electrostatic discharge from human contact

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEEE 1688-2015 PDF

IEEE 1688-2015 PDF

$85.50 $171.00