IEEE 1776-2008 PDF

IEEE 1776-2008 PDF

IEEE Recommended Practice for Thermal Evaluation of Unsealed or Sealed Insulation Systems for AC Electric Machinery Employing Form-Wound Pre-Insulated Stator Coils for Machines Rated 15 000 V and Below

$47.00 $94.00 -50%
isbn 9780738158747
Product Code: IEEE 1776
Stock In Stock
Published: 02/13/2009
Number of Pages: 24
File Size: 1 file, 1.5 MB

Available Options

Product Description

IEEE Recommended Practice for Thermal Evaluation of Unsealed or Sealed Insulation Systems for AC Electric Machinery Employing Form-Wound Pre-Insulated Stator Coils for Machines Rated 15 000 V and Below

Introduction: This introduction is not part of IEEE Std 1776-2008, IEEE Recommended Practice for Thermal Evaluation of Unsealed or Sealed Insulation Systems for AC Electric Machinery Employing Form-Wound Pre-Insulated Stator Coils for Machines Rated 15 000 V and Below. This recommended practice is intended to provide an evaluation of the thermal capability of an unsealed or sealed insulation system. Other aging factors; electrical, mechanical, and environmental are also known to be important. Test procedures for evaluating those factors, both individually and in combination with each other, will be pursued by other working groups. Notice to users Laws and regulations Users of these documents should consult all applicable laws and regulations. Compliance with the provisions of this standard does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights This document is copyrighted by the IEEE. It is made available for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self- regulation, standardization, and the promotion of engineering practices and methods. By making this document available for use and adoption

Contents:

  • 1.1 Scope
  • 1.2 Purpose
  • 1.3 General conditions
  • 1.4 Methods of evaluation
  • 4.1 General
  • 4.2 Construction of test models
  • 5.1 General
  • 5.2 Temperature exposure
  • 5.3 Mechanical stress exposure
  • 5.4 Moisture exposure by humidification
  • 5.5 Voltage exposure after humidification
  • 5.6 Water immersion test (for sealed systems only)
  • 5.7 Failure criteria
  • 6.1 Data
  • 6.2 Analysis
  • 6.3 Comparison
  • 6.4 Extrapolation
  • 6.5 Nonlinear or dissimilar curves
  • 6.6 System identification

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEEE 1776-2008 PDF

IEEE 1776-2008 PDF

$47.00 $94.00